How to replace floor drain How to clean and maintain

The floor drain is an important interface between the drainage pipeline and the indoor ground. It is an important component of our indoor drainage system. Its performance directly affects the quality of indoor air, and it is very important to control the odor in the bathroom. If there is a problem of anti-odor in the floor drain, we need to replace it in time. Then how to replace the drain floor drain , the following article to introduce to everyone to replace the floor drain method.

How to change the floor drain: Determine the shape and size of the floor drain

The shape of the floor drain has a square shape and a round shape. If it is a new house decoration, the best choice for the square, the construction is more convenient.

If it is the decoration of old houses, choose according to the original floor drain shape. Usually, the size of the commonly used floor drain is 10*10cm. There are also some larger ones, which need to be selected according to the actual situation in the home.

How to replace the floor drain: pay attention to the depth of the pipe

At present, there are mainly T-type and deep-water seal inner core drains. The T-type is relatively short, and the deep water seal is longer (usually more than 12cm). You can take things into it and measure the depth to select them.

How to replace floor drain: replace floor drain

1, first pick up the child and pliers, the original floor drain completely removed, and will be around the cement, clear sand, cement and other debris clear and clean.

2. After cleaning, use a paper towel to clean the water, clean the pipe mouth with a rag, remove the rag after the cleaning is completed, and put it in the floor drain to check if the floor drain level is appropriate.

3. After cleaning, take the appropriate amount of impervious material and mix well. It is best to use water-repellent cement here, otherwise the water may seep into the next layer.

4. Then mix evenly the anti-leakage cement and apply it to the perimeter of the groove and the new floor drain. Wait for 2 minutes. Put the floor drain into the groove, pay attention to leveling, and finally make the first 1-2 mm.

5. Put the filter shaft that has passed through the water into the base of the floor drain, and rotate it properly so that the silicone around the filter shaft is fully integrated with the base. Put the filter on it and clean the floor drain. Replacement is complete.

Floor drain how to clean and maintain

1. The floor drain must be cleaned by removing the floor drain. Before cleaning, the debris on the floor drain should be cleaned first to prevent the sundries from falling into the sewer. Then use a brush to clean the removed floor drain and install the floor drain after disinfecting and deodorizing the sewer.

2, the maintenance of the floor drain should pay attention to regularly clean up the impurities near the floor drain, to avoid impurities into the floor drain inside the long accumulation of congestion, but also pay attention to regular cleaning to maintain the smooth flow of floor drain. Because ground drains connect the sewers to bacteria, it is also necessary to regularly disinfect floor drains.

The article concludes: The above is about how to replace the floor drain and how to clean and maintain the floor drain. I hope to give you some help. The replacement of the drain is actually very simple. The user can learn more by himself.

The range of MASHINE cable drum trailers are equipped with braking and road lighting systems to conform with EEC Directives and are designed to travel fully laden at road speed - for safe and easy cable drum handling all MASHINE cable drum trailers are fitted with hydraulic hand pump operated lift/lower systems as standard. 

When the cable drum is lifted and raised, mechanical locks ensure cable drum security in transit - suitable for LV, HV, EHV, fibre optic, street lighting and rail cable pulling and cable laying installations.

T&D meet the Cable Drum Trailer requirements of the DNO, utility and cable laying contractors enabling underground cable installations within the LV-HV power and telecommunications industries.

Cable drum trailers are available for low and 11-33kV high voltage cables, street lighting cables, BT cables and fibre optic cable installations.

Cable Drum Trailer

Cable Drum Trailer,Hydraulic Drum Trailer,Cable Reel Drum Trailers,Extendable Trailer

NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , https://www.marshine-power.com