How to install cylindrical inner space in TIMKEN bearing

Source: China Bearing Network Time: 2018-04-23

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The friends who know TIMKEN bearing devices know that if the correct method is used in the process of the device, the TIMKEN bearing device will be much simpler. Today I will analyze how to install the cylindrical inner space TIMKEN bearing.
When the TIMKEN bearing is not equipped with a separate bearing; the TIMKEN bearing can be mounted on the shaft first by the press; then the shaft can be loaded into the bearing housing hole together with the TIMKEN bearing; if the TIMKEN bearing is small; a soft metal hammer can also be used. The end face of the ferrule is forced to force the TIMKEN bearing. It is necessary to evenly distribute the bearing ring on the bearing ring.
The device of the TIMKEN bearing is easy to separate from the inner ring and the outer ring to the shaft or TIMKEN bearing seat. At this point it should be noted that the inner ring shaft should be as close as possible to the outer ring bearing housing; then prevent the rolling of the rolling body and the raceway.
When the TIMKEN bearing scale is large; because the required device force is large; then the TIMKEN bearing inner ring or bearing housing is heated before the device is required. The heating method can be electric induction heating, oil bath heating, etc. When the device is installed; the heating temperature should be strictly controlled. When heating TIMKEN bearings; usually should be 80~1000 Â°C; the maximum should not exceed 1200 Â°C. Note: TIMKEN bearings with dust cover or sealing ring can not be heated; otherwise it will form The lubricant is lost.

Recommend to friends comments close window

Bearing related knowledge

Talking about the pre-tightening mechanism of the rolling bearing, how to avoid the overheating of the imported bearing workpiece?
Smooth method commonly used in high-speed bearings for combined needle roller bearings

This article links to http://
Please indicate the bearing network http://

Previous:Function of full complement cylindrical roller bearing Next:Smooth gate analysis of Swedish SKF bearing

Fruit Bag is made of PE material, can be woven into different mesh sizes.

Fruit Bag is ideal and disposable for packaging of agricultural produces,such as onion,fruit etc.

Fruit Bag is also can be used in containing the soil of building.

Fruit Bags are strong enough for holding heavy products.

We can produce any colors and sizes according client's demands.

Fruit Bag

Fruit Bag,PE Net Potato Bag,Potato Mesh Bag,Onion Storage Bag

HEBEI TUOHUA METAL PRODUCTS CO.,LTD , https://www.penettings.com