Five steps for renovation of doors and windows

[China Aluminum Network] The decoration of windows and doors is a large renovation project. There are many studies involved. If the construction staff is not careful, it is easy to distort the doors and windows, and it will be deformed in the future to create a series of problems. How to avoid these problems? , And how to supervise the construction staff to do a good job of renovation of doors and windows, which need to understand a certain amount of common sense, Xiao Bian will share the experience of doors and windows renovation for everyone.

It is better to replace the doors and windows before dismantling the window. Because the window removal process will destroy the walls inside and out, it is better to replace the doors and windows before proceeding with the next step. Xiaobian suggested that doors and windows of high-quality brands should be selected when fitting doors and windows, because the quality of doors and windows profiles will determine the level of the entire doors and windows, sealing and anti-aging issues.

The second selection precision and strength of the small windows and doors recommended that we must go to the formal building materials market, especially some poor plastic doors and windows, poor quality of the inner lining steel, and even no lining steel, other parts are also very poor.

Third, why the doors and windows will turn yellow Some plastic doors and windows look pale or gray, indicating that the stable ingredients in their materials is not enough, easy to aging yellow.

The fourth is to check whether the hardware is flexible and smooth. The sliding window of the sliding window frame should have aluminum sliding rails at the bottom to facilitate its replacement. There should be a fixed piece in the middle of the sealing top of the window fan, which is the key to the sealing performance of the sliding window.

There should be styrofoam filling between the 5th window installation window frame and the wall body, and the inside and outside of the window frame must be sealed with silicon copper glue or sealant to prevent water seepage. Remember, after installation, users should remove the protective film, which can extend the service life of doors and windows.

The five steps in the renovation of doors and windows do you understand? There is no sense of art in the renovation of doors and windows, but the knowledge in it is actually quite deep. If you do not pay attention, you will cause problems for opening windows or opening doors in the future. Doors and windows belong to the external image of a home, must be maintained!