Hammer Crusher Introduction

structure

Hammer crushing case body, rotor, hammer head, counter lining plate, sieve plate and so on.

Characteristics

(1) Work hammer, cast by new technology, with wear resistance and impact resistance.

(2) The required particle size can be adjusted according to customer requirements.

(3) Hammering the structure of the body and sealing, solving the dust pollution of the crushing workshop and the problem of ash leakage in the body.

(4) The overall design is beautiful, compact, with less wearing parts and convenient maintenance. It is an upgraded product.

(5) Compact structure, beautiful appearance, good wear resistance and convenient maintenance.

working principle

The hammer crusher mainly relies on the impact energy to complete the crushing material operation. When the hammer crusher is working, the motor drives the rotor to rotate at high speed, and the material enters the crusher cavity evenly. The high-speed rotary hammer impacts and shears the tearing material, causing the material to be broken. At the same time, the gravity of the material itself causes the material to The high-speed rotating hammer head rushes toward the baffle and the screen strip in the frame body. In the lower part of the rotor, a sieve plate is arranged, and the size of the pulverized material smaller than the mesh size is discharged through the sieve plate, and the material larger than the mesh size is retained in the sieve plate. The upper part continues to be hit and ground by the hammer until it is broken to the desired discharge particle size and finally discharged through the sieve plate.

MEE Electric Telescopic Mast

Mee Electric Telescopic Mast,Telescopic Antenna Pole,Antenna Extension Pole,Crank Up Mast

TIANHEMAST , https://www.robomasts.com

Posted on