How to buy flooring in the summer, how to avoid defects?

In summer, the so-called “sunburst is not allowed to condense in the afternoon and the nations are in the furnace”. In summer, it is a rainy season. It can be said that “the wind is blowing over mountains, and the rain is flying in the air.” Therefore, it is hot and rainy. How to buy flooring in the summer, how to avoid defects?

In fact, in the current home decoration, if the floor is used during the use, if the material is selected and properly laid, there will be some defects, such as worms, quilting, noise, dirty boards, painted faces, drums, and warping. Now For these flaws, Haoyun Microcrystalline Stone Flooring Xiaobian carries out data compilation and sharing with everyone to avoid these defects affecting your home effect.

For the problem of insects, this is due to the biting of insects in the wood. It is often disturbing to see piles of powder on the floor surface. The reason is related to the floor selection. In order to prevent worms, the first step is to purchase floors that have been produced through a steam kiln jet steaming process. Although the price is relatively expensive, all the eggs in the wood have been killed; the second is to carefully select the keel, and there are wormholes or bark. Never use it.

The problem of quilting is because some floors have been covered with large gaps between the slats for several days. This is mostly related to the high moisture content before the laying of the floor, which shrinks due to the high temperature or air drying in the room. Note that the moisture content of the floor prior to laying is in the range of 8% to 13%, and it must be timely oiled after being laid.

As for the sound problem, this is generally due to the low quality of the floor laying. When people walk around, they will find buzzing noises and they will feel very uncomfortable after hearing it. To this end, it is necessary to pay attention to the keel and the ground. The floor and the keel are firmly connected and the number and length of nails are appropriate. At the same time, to prevent the keel spacing is too large or the moisture content is too high, otherwise drying and shrinking loose after laying will also have a certain impact.

Some consumers may experience "face-painting" when laying floors. This is because the colors of the slats of the same species also vary greatly. If it is not properly laid, it will easily show a "face". When using varnish natural floor laying, especially when the species is extremely chromatic, you should consider the selection and deployment of the slats so that the floor color changes from shallow to deep, or gradually transition from deep to shallow.
The last common defect is the kicking of drums. Some floors are damp and bulging after they are laid. Most of this is related to the environment around the floor, especially the base tide or floor water.

How to ensure that the floor does not play drums? Haoyun Microcrystalline Stone Flooring reminds you to pay attention to three points:

1. When the civil engineering project is just the result, it cannot be immediately laid.

2, if the room is located in a humid environment, it is appropriate to lay the floor

3, when laying, the moisture content of the floor can not be lower than 7.8%

Of course, the above is just for the different kinds of floors that are popular on the market, such as solid wood flooring, laminate flooring, etc. However, when purchasing such flooring, whether it meets the environmental protection philosophy of high-quality, low-carbon life, it also requires the benevolent to see the wise , And our production of Haoyun microcrystalline stone wood floor, is a high-paying external experts led by the R & D team composed of research and development team successfully developed, is the use of stone powder as the main raw material of environmentally friendly wood floor patented products. Based on the law of immortality, the R&D team extracted the lignin from the stone after two years of trial and error, and successfully developed a new type of composite material that is both solid and woody, ie, “Petrified Wood”. Agent. Adding a woodifying agent to the stone powder exerts external force and is shaped by the mold. A new material category is the Haoyun Microcrystalline Wood Floor.

When it is put into production, it is finally determined that 70% of the raw materials in the product are stone powder and 30% is a wood-based agent after repeated trials and production. The stone powder and wood-based chemicals come from scientific research results of “wood fossil” technology. Therefore, In the production process, no glue of any wood and adhesive is used at all, and energy saving and resource utilization are truly realized, and the comprehensive utilization of resources is improved. At the same time, the manufacturer sent the product to the National Building Material Testing Center for testing. The final test result proved to be a product with almost zero defects: “It not only perfectly preserves the texture and comfort of the wooden floor, but also has ceramic tiles that are not afraid of water, impact resistance, and care. Convenient for many advantages, at the same time, the product is zero-formaldehyde, low-carbon, healthy, and environmentally friendly, and it is a revolutionary product that spans the times and is a new generation of "Almighty King" decorative materials."

Therefore, instead of your time-consuming and strenuous efforts in purchasing floorboards in the summer and studying how to avoid defects, it is better to choose directly and provide you with a crystallized stone flooring to ensure you are worthwhile, value for money, and feel at home.

High Tensile Rockfall Mesh

High Tensile Rockfall Mesh,Rock Fall Protection Mesh,High Tensile Rock Netting,High Tensile Rock Fall Netting

ANPING HONGYU WIREMESH CO.,LTD , https://www.hongyu-wiremesh.com