![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Wall decoration at home is indispensable, but it is also a big headache. Some people choose to put on wallpaper, and some people just scratch putty or white. So, the question is coming, many people will ask what is the difference between shaving white and shaving putty , the following editor will answer for you one by one.
First, the difference between shaving white and putty
1. The difference between shaving white and putty . I believe most people think that it is the same thing as shaving putty and shaving white. In fact, this is not the case. Although both use big white powder, the materials are different.
2. The difference between scraping white and scraping putty , scraping putty is actually a function of filling the wall, so that the entire wall base layer looks flat, and makes a bedding for the later paint construction.
3. The difference between scratching white and scraping putty . Nowadays, no one has used big white for home decoration. It is stipulated that big white can not be used to approve putty. Scraping white is a kind of indoor wall decoration in buildings, and is also a common In fact, scraping Dabai is actually scraping the white surface with the construction white powder on the rough surface of the cement.
The above is about the difference between shaving white and putty. You can understand it, and then we will learn the construction steps of putting putty together.
Second, the construction steps of putty scraping
1. Putty preparation
Our putty powder needs to be prepared before construction. When preparing the putty powder, we must mix it according to the requirements, so that the construction effect will be just right. The putty also needs to be evenly mixed, wait for the putty to stand for 10-20 minutes, then stir it again before it can be used.
2. Putty batch scraping
You can use the scraper or spatula for putty construction to batch scrape. In batch scraping, you need to scrape with even force, so that the putty and the wall can be better bonded. The thickness of the batch scraping is generally about 0.8 ~ 1.5mm. If the batch scraping is too thick, the hollow drum phenomenon will occur, and if it is too thin, powdering will occur, which will cause unnecessary trouble for later use. In addition, new houses are generally approved twice, and second-hand houses are recommended three times. You can decide according to the situation.
3. Sandpaper
After the putty that needs to be scraped is dry, we can use sandpaper for polishing. Grinding must be carried out from all sides. Special attention should be paid to the corners when grinding. Keep it as straight as possible. Do not miss the sandpaper or putty put through. After the sandpaper is polished with sandpaper, clean the dust on the surface, then you can brush the topcoat.
Editor's summary: The above is about the difference between scraping white and scraping putty , and the construction steps of scraping putty , I hope to help everyone. If you need to know more about decoration, please continue to pay attention to the information on our website.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Camping Lamp,Portable Retro Camping Lamp,Led Camping Lamp,Creative Camping Lamp
Land of Lights Electric Appliance Co., LTD , https://www.loloutdoorlight.com