How to choose modern sensors


Modern sensors vary widely in principle and structure. How to select sensors according to specific measurement purposes, measurement objects, and measurements, and the environment is the first problem to be solved when performing a certain amount of measurement. When the sensor is determined, the matching measurement method and measuring device can be determined. The success or failure of the measurement results depends to a large extent on whether the sensor selection is reasonable.

1. Determine the type of sensor based on the measurement object and the measurement environment.

To carry out a specific measurement work, we must first consider the principle of the sensor, which needs to be analyzed after analyzing various factors. Because even if it is measuring the same physical quantity, there are many kinds of sensors available for selection. Which kind of sensor is more suitable, you need to consider the following specific problems according to the characteristics to be measured and the conditions of the sensor: the size of the range; The position of the measured position on the sensor volume; the measurement method is contact or non-contact; the signal extraction method, wired or non-contact measurement; the source of the sensor, domestic or imported, the price can withstand, or self-developed. After considering the above issues, you can determine which type of sensor to use and then consider the specific performance of the sensor.

2, frequency response characteristics

The frequency response characteristic of the hardware sensor determines the frequency range to be measured. It must maintain the undistorted measurement condition within the allowable frequency range. In fact, the response of the sensor always has a certain delay, and the shorter the delay time, the better. The frequency response of the sensor is high, and the measurable signal frequency range is wide. Due to the structural characteristics, the inertia of the mechanical system is large, and the frequency of the signal that can be measured by the low frequency sensor is low. In dynamic measurement, the response characteristics should be based on the characteristics of the signal (steady state, transient, random, etc.) to avoid over-fire error.

3, the choice of sensitivity

Generally, in the linear range of the sensor, it is desirable that the sensitivity of the sensor be as high as possible. Because only the sensitivity is high, the value of the output signal corresponding to the measured change is relatively large, which is beneficial to signal processing. However, it should be noted that the sensitivity of the sensor is high, and the external noise that is not related to the measurement is easily mixed in, and is amplified by the amplification system, which affects the measurement accuracy. Therefore, the sensor itself should be required to have a high signal-to-noise ratio, and the plant disturbance signal introduced from the outside is reduced. The sensitivity of the sensor is directional. When the measurement is a single vector and its directivity requirements are high, other sensors with small sensitivity should be selected; if the measurement is a multi-dimensional vector, the cross sensitivity of the sensor is required to be as small as possible.

4, stability

The ability of a sensor to remain unchanged after a period of use is called stability. In addition to the structure of the sensor itself, the factors affecting the long-term stability of the sensor are mainly the environment in which the sensor is used. Therefore, in order to make the sensor have good stability, the sensor must have strong environmental adaptability.

Before selecting a sensor, investigate the environment in which it is used, select the appropriate sensor according to the specific use environment, or take appropriate measures to reduce the environmental impact.

The stability of the sensor has quantitative indicators. After the usage period, it should be recalibrated before use to determine whether the performance of the sensor changes. In some cases where the sensor is required to be used for a long period of time and cannot be easily replaced or calibrated, the selected sensor has stricter stability requirements and must withstand the long-term test.

5, linear range

The linear range of the sensor is the range in which the output is proportional to the input. In theory, within this range, the sensitivity remains constant. The wider the linear range of the sensor, the larger the range and the guaranteed measurement accuracy. When selecting a sensor, when the type of sensor is determined, it is first necessary to see if its range meets the requirements. But in reality, any sensor can't guarantee absolute linearity, and its linearity is relative. When the required measurement accuracy is relatively low, within a certain range, the sensor with less nonlinear error can be approximated as linear, which will bring great convenience to the measurement.

Global hardware network

Concerned about surprises

Label: Sensor Frequency response characteristics Dynamic measurement Linearity Nonlinear error

Previous: Common sealing gaskets Next: How to choose drill bit according to different purposes

52 Inch ABS Ceiling Fan

Lowes Outdoor Ceiling Fans,Outdoor Ceiling Fan With Light,Installing A Ceiling Fan,Large Ceiling Fans

JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.windfansummer.com

Posted on