![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
<<<Links: Construction and Acceptance of Wooden Windows and Doors
A. Opening Welding of Angles of Doors and Windows, Breakage of Profiles
This kind of problem is mainly caused by the carelessness of the installer during handling, handling, and installation. Therefore, the installation personnel should take care when installing, and do not smash, throw or fall. Beat the door frame and use a plastic hammer to gently knock. Do not use a hammer to knock.
B. Tilting of doors and windows
After the doors and windows are installed, there is a phenomenon of tilting and sliding of the door leaf. This is mainly due to the fact that the installer did not use the wire during the installation, and checked the verticality between the door and the window and the floor or the table by the ruler, causing excessive deviation. . Therefore, when installing windows and doors, it must be done according to the installation specifications.
C, doors and windows are not horizontal
After the doors and windows are installed, there is a phenomenon of unevenness of the gap between the fan head and the frame, and there is sometimes a problem that the upper width is narrower or the lower width is narrower. To deal with this kind of problem, first measure the level of the window sill or the ground to see which side is high, and then use the high point as a reference. The low place is temporarily fixed with wooden wedges or pads to adjust the level of the window frame. Level adjustment is good, the window will not appear high side and low phenomenon
Door and window acceptance window
Fenghua Jade Motor Co., Ltd. , http://www.ywwjsl.com