Bathtub knowledge entry series maintenance articles

Bathtubs currently on the market are mainly made of acrylic, steel plates and cast iron. The cast iron bathtub is strong and durable, with high gloss and good acid and alkali resistance, but due to the limitations of materials and processes, the style is relatively small, heavy, difficult to handle, and installed;
The steel bathtub is resistant to wear, has a smooth surface, is easy to clean, but does not tolerate impacts, and the general insulation is not very good;
Acrylic bathtub can have many shapes, good insulation effect, easy to clean, and moderate price, but because the surface hardness is lower than cast iron and steel plate cylinder, the surface is easy to produce scratches. However, the import of high-brightness, high-strength sanitary acrylic sheet, to some extent overcome some of the shortcomings of acrylic. The acrylic bathtub surface of the big brand is specially treated and has better abrasion resistance than the general acrylic bathtub. If accidental scratches occur on the surface, if the scratches are light, use a toothpaste and a toothbrush to brush lightly. If the scratches are deep, it is advisable to seek professional advice. Professional repair personnel are required to dispose of them.
Use a bathtub to pay attention to maintenance, which can extend the life of the bathtub, but also to maintain a bright appearance: every week to clean the bathtub to ensure that the bathtub is dry after each use; use neutral liquid cleaners and flexible fabrics or good sponge to clean the bath, avoid Use cleaners that contain abrasives, strong acids, or strong alkalis; do not leave metal objects in the bathtub. They will rust the bathtub and dirty the surface. In addition, the use of soda powder to eliminate dirt is also good.
If there is severe scratch on the surface of the bathtub, customers can be advised to refurbish it in the following ways: The polishing of the bathtub is a very professional thing. If the surface of the bathtub is really heavy, it is advisable to consult a professional or ask a professional service person. maintenance.
Bathtub polishing process:
Different numbers of sandpaper (such as 800#, 1000#, 1500#, etc.) are selected according to the degree of scraping. If the scratches are deep, then the blade needs to be used for processing and then sandpaper is used. The last used sandpaper number is generally 1500# or 2000#. All sand processes require water, ie water mills. And there are requirements in the direction of the grinding process. The final polishing uses special wool polishing wheels and special polishing agents.
Bathtubs used for a long time tend to show signs of decay, stains, and roughening. At this time, in order to reduce expenses, in order to avoid buying expensive bathtubs again, some engineering companies may be invited to perform bath refurbishment. Once the bathtub has been refurbished, with a beautiful, shiny surface, care must be taken naturally. For the bathtub that you just bought, you want to be careful and extend your life. Here are a few tips to clean the bathtub and keep the tub shiny.
1. Clean the bathtub every week to make sure the bathtub stays dry after each use.
2. Clean the tub with a neutral liquid cleaner and use a flexible cloth or a good sponge.
3. Avoid using abrasive and highly alkaline cleaning products.
4. Avoid the use of dark detergents that can easily cause pigments to penetrate the cylinder surface.
5. After using the water hose, do not forget to turn off the water so as to avoid frequent dripping and cause bathtub water accumulation.
6. If there is any damage to the bathtub, the company concerned should be notified immediately for repair so that the problem does not deteriorate.
7. Do not leave metal objects in the bathtub. They will cause the bathtub to rust and soil the surface.

Bathtub decoration company