Monel K-500 is a precipitation-hardenable nickel-copper alloy, with excellent corrosion resistance characteristic of Monel 400, and with greater strength and hardness. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength of alloy 400. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.
This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.
Standard:
Monel K-500 Â UNS: No.N05500 DIN/EN:2.4375
Â
Type | Alloy steel pipe |
Seamless pipe | Φ32*3.5mm~Φ630*9mm |
Welded pipe | Dn15mm~2600mm |
Thickness | 0.2mm-60mm |
Length | 1000mm,2000mm,2440mm,3000mm,6000mm,6096mm,10feet,12m,etc |
Finish | NO. 1,2B |
Standard | ASME, ASTM, EN, BS, GB, DIN, JIS etc |
Materials | nickle alloy |
Packing | 1. woven bag  2. wooden case |
Characteristics:Â
1. Good mechanical propertiesÂ
2. Yield tensile strength
3.Highly resistant to chloride and sulfide stress corrosion cracking
4. Resistant to aqueous corrosion and chloride ion stress corrosion cracking
5. High temperature resistant
6. Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
7. Excellent welding characteristics
Chemical composition
% | Ni | Cu | Fe | C | Mn | Si | S | Al | Ti |
min | 63.0 | 27.0 | Â | Â | Â | Â | Â | 2.30 | 0.35 |
max | Â | 33.0 | 2.0 | 0.18 | 1.5 | 0.50 | 0.010 | 3.15 | 0.85 |
Applications:
Sour-gas service applications
Oil and gas production safety lifts and valves
Oil-well tools and instruments like drill collars
Oil well industry
Doctor blades and scrapers
Chains, cables, springs, valve trim, fasteners for marine service
Pump shafts and impellers in marine service
Â
Product Category | Specification(mm) | Grade | ||
Heat-resisting Superalloy Anticorrosion Alloy | Hot-rolled Bar |  diameter (length of side) | Φ10~85 , 30~85 | FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625 |
Forged Bar | diameter (length of side) | Φ 90~250 | ||
Hot-rolled Sheet | thickness×width×length | 5.0~8.0×650~700×1000~2000 | ||
Cold-rolled Sheet | thickness×width×length | 0.8~4.0×700~1000×400~2000 | ||
Cold-drawn -Steel | diameter            hexagon length of side | Φ8.0~35.0                    S 8.0~32.0 | ||
Forged Shaft | diameter (length of side) | Φ 200~450 | ||
Forged Disc |  diameter (length of side) | Φ500~1000×≥100 | ||
Forged Die Block | length of side mm | 200~500 | ||
Precision Alloy | Cold-rolled Strip | thickness×width | 0.03~3.0×≤300 | Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeC |
Hot-rolled Bar | diameter (length of side) | Â 21~55 | ||
Hot-rolled Flat Steel | thickness×width |  3.5~13×≤300, 8~20×≤450 | ||
Cold-drawing Wire | diameter (length of side) | 0.1~8.0 |
Packing: standard export packing, seaworthy packing, bundles, plastic bag, woven bag, wooden cases, plywood case, iron case, or as per customer require.
Our Advantages:
1. More than 200 patterns
2. Bottom price
3. Reliable quality and service
4. Fast delivery
We will reply you in 24 hours. Please remember check your inbox.
Welcome to inquiry. Looking forward to cooperating with you in the near future.
Shower rod, Shower Reinforcement Bar also call shower glass support bar or glass panel bracing bar, it mounts directly to the wall or ceiling to secure vertical fixed glass panels at multiple angles.
A great solution for glass panel needing to be secured to an adjacent wall for stability but that wall is not at 90° to the fixed panel or glass-to-ceiling application is not a standard angle.
Specification
1. Material: Brass Head/ Mount+ Stainless Steel Bar
2. Surface: Chrome Polished Finish
3. Suitable for 6-12mm glass
4. NO glass cut-out / drilling needed
5. Length: 300-500mm, accept customize length. More flexible: adjustable length or cut-to-short to customize fit for your bathroom.
6. Installation: Shower Screen Support Bar assembled without notch or drilling hole in the glass (thru-glass supply bar also available). Holds the glass panel in place with an adjustable clip tightened by a plastic tipped screw.
7. 45°, 90° or Multi-Angle fixing option; Wall-to-Glass, Ceiling-to-Glass or Glass-to-Glass
Shower Rod,Shower Curtain Rod,Shower Curtain Rail,Curved Shower Rod
Jiangyi Industrial Co., Ltd , http://www.cnjyhardware.com