Bordeaux liquid use points

1. Bordeaux mixture is a preventive fungicide and is usually sprayed before the onset of illness.

2. Plant growth period is different, the concentration of drug is not the same. Generally, the organs in the early stage of plant growth are delicate, the drug resistance is poor, and the concentration should be lower.

3. Different proportions should be used according to plant variety, target, season and temperature. Such as roses, jellyfish and other susceptible to copper damage, should be used in equal or multi-type; in high temperature and arid climate, Solanaceae and Cucurbitaceae flowers are susceptible to lime phytotoxicity, using half or a small amount; After spreading the leaves, the leaves are susceptible to phytotoxicity and cannot be used. If necessary, the same amount can be used after the winter leaves or before the early spring germination.

4. If it is self-made, it should be used now. The storage period should not exceed 24 hours. For example, adding 0.2 to 0.3% of filtered soy milk or rice soup during preparation can improve the adhesion. It is not advisable to spray at high temperature at noon, otherwise it may cause phytotoxicity. It is best to spray on the sunny evening.

5. Can not be mixed with soap, rosin mixture and alkali decomposition agent, but can not be mixed with stone sulphur mixture, otherwise it will easily produce copper sulphide precipitation, which will invalidate the two drugs and cause phytotoxicity. Plants that have used stone sulphur mixture cannot use Bordeaux mixture for 30 days.

6. The raw materials used to prepare the Bordeaux mixture must be of good quality. When copper is used in Bordeaux mixture, 0.5 to 1% of lime milk can be sprayed, and lime poison should be reduced.

【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

1. Product Description:

This product is a kind of styrene-acrylic ester high molecular polymer,it can be used with starch to do surface sizing on paper, increase the surface strength of paper,thereby to achieve the best water resisting property.

2. Specifications:

Item

Index

Appearance

Brown beige liquid

Solid content

30%±2

Viscosity

≤30

pH

3-5

Density

1.02-1.1g/cm³

Ionic

cationic

Flash Point

>  200℃Auto Ignition Temp


4. Use Method:

The product is weak cationic, it can be used with cation and nonionic additive, such as cationic starch,basic dye and polyvinyl alcohol etc, but cannot be mix used with additive of strong cation.

The consumption of the product depends on the quality of base paper, internal sizing and size resistance. It is usually 0.5-2.5% of oven dry weight.

 

5. Package and storage:

200KG or 1000KG plastic drums.

The storage period is 6 months below the temperature 5-35℃,keep away from sunlight and frost.

Styrene Acrylic Copolymer




Styrene Acrylic Copolymer

Styrene Acrylic Copolymer,Cationic Styrene Acrylic Copolymer,Anionic Styrene Acrylic Copolymer,Sizing Agent For Corrugated Paper

Shandong Tiancheng Chemical Co., Ltd. , http://www.tianchengchemical.com

Posted on