Home life common sense wood floor care matters needing attention

Winter maintenance wood floor care matters needing attention

Solid wood flooring is very sensitive to temperature and humidity. In winter, due to the influence of temperature and humidity, how to prevent the lifespan of solid wood flooring from decreasing? This is a problem that we are all very concerned about. Here we look at the maintenance of solid wood flooring in winter, what should pay attention to.

1, appropriately increase the indoor humidity

Many people believe that in the winter, when the outside air comes in, the temperature in the city drops, and the phenomenon of floor separation naturally decreases. However, the real cause of floor separation from the seams is humidity, not temperature. In addition, the higher the air temperature, the more saturated the water, which means that the indoor humidity in winter is higher than the outdoor. At this time, the outside cold air will be exchanged in, which will only make the room dry. Having an air humidifier is very straightforward and the humidity in the room is preferably controlled between 50% and 60%.

2. Step by step in the process of opening and closing geothermal heat

The first use of geothermal heating, attention should be slowly warming, if the temperature is too fast, the floor may be cracked due to expansion and distortion. And the use of geothermal heating, the surface temperature should not exceed 30 °C, when the room temperature in the human body is the most suitable ambient temperature below 22 °C, the life of the floor can also be guaranteed. When the weather is warming and indoors no longer needs heating, it should be noted that the shutdown of the geothermal system must also take place slowly. Do not dip suddenly, otherwise it will also affect the service life of the floor.

3, regular play solid wax maintenance

The interior of the solid wood floor often retains a certain amount of moisture. In the event that the geothermal heat rises in the winter, the water loss of the floor shrinks, and the gap between floors will increase. At this point, applying a solid wax to the floor will reduce the extent of the gap expansion.

4, avoid contact with a lot of water and acid, alkaline liquid

Try to avoid contact with large amounts of water on the wooden floor; avoid wiping with acidic and alkaline liquids so as not to damage the finish of the floor surface paint.

   

Avoid misunderstanding of solid wood floor cleaning and maintenance errors

Due to various reasons, many people have unclear understanding of solid wood flooring and will enter the maintenance misconception. Based on experience, we have sorted out the misunderstandings that most people can easily access to help families.

Misunderstanding 1: Over-maintenance

It is wrong to repeatedly use a very wet mop to repeatedly mop the floor every day. The solid wood flooring needs proper maintenance rather than over maintenance.

Misunderstanding 2: Ignore maintenance

Ignore maintenance, do not clean for a long time, do not pay attention to ventilation, the situation does not promptly repair, such as a long time without repair after the drum, it will easily lead to Alice or even unable to repair.

Myth 3: Drench the mop with water or scrub with alkaline water

Keep the floor dry and clean. Do not allow the mop to be wetted with water or scrubbed with alkaline water or soapy water so as not to damage the brightness of the paint and damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop.

   

Cleansing method makes wood flooring more beautiful

How to clean solid wood floors? This problem is easily overlooked. In fact, the cleaning of solid wood floors is very particular and not like other floors. If you are often mopping the floor of solid wood, it is very harmful to the floor. Let's take a look at how to clean it.

1. Part of the board is inadvertently stained and should be removed in time

Oil stains, paints, and inks can be wiped with a special stain remover; if stains such as blood stains, juices, red wine, beer, etc., can be wiped with a damp rag or with a rag and a suitable amount of ground cleaner. No strong acid-base liquids are used to clean the floor.

2, regular cleaning floor

Sweep the floor regularly, vacuum the dust, prevent the accumulation of sand or frictional dust and scratch the surface of the floor. Place the doormat outside the door so as not to carry sand or frictional dust into the room.

3, large-scale flooding or local long-term water immersion treatment

If inadvertently large-scale flooding occurs or local water is soaked for a long period of time, if there is water, water, water, water, and water, the water should be promptly dried with a dry cloth, and let it dry naturally. It is forbidden to use an electric heater to dry or in the sun. Exposure.

4, keep the floor dry and clean

Solid wood floor maintenance

The humidity in the room should not be too large. Keep the floor dry and clean. Clean it with a wrung cotton mop. If you encounter stubborn stains, wipe it with a neutral cleaning solvent and wipe it with a wrung cotton mop. Never use it. Wash with an organic solvent such as an acid, a basic solvent, or gasoline.

Floor maintenance floor waxing solid wood floor paint room heating humidifier

Aluminum Rolled Sheet  are widely used in aerospace, rail transit, cars, ships ,marine engineering, energy, industrial mould and other fields, including cold rolled sheet and hot rolled sheet .

Hot rolled sheet

Alloy Series	Typical alloy	Temper	Specification/mm
			Thickness	Width	Length
3xxx 5xxx	3003.5052 5754.5182 5086.5083	F/O H111 H112	2.2-15	1000-2600	2000-24000
2xxx 6xxx 7xxx	2024.6061 7020.7075	F/O H111 H112	2.2-15	1000-2600	2000-24000

 

cold rolled sheet

Aluminium Rolled Sheet

Aluminium Rolled Sheet,Aluminum Roofing Sheet,High Strength Aluminum Sheet,Aluminum Sheet Cold Rolled Sheet

La Ya Aluminium products Co.,Ltd. , https://www.layametal.com