Avoid emptying and shedding tile construction note

Tile laying is a meticulous job and requires high standards for construction materials and construction masters. No matter what the problem occurs, it is very easy to cause hollowing in the tiles . Hollowing hazards can not be overlooked, not only may cause the tiles to rupture, and even cause the entire tile to appear to fall off, and may also pick up items or hurt people. How to reduce or even avoid empty tiles ? Let's take a look at the Raiders prepared specifically for everyone.

One: Do not be light-hearted and fully understand the empty tiles

Many owners often only look at the appearance, flatness, and verticality of the tile paving when they check the tiles. And it ignores the most important one, that is, tile hollow inspection.

1. Recognize the empty tiles

Many families choose ceramic tile as the surface finish material for home wall and floor. When the material is not qualified or construction is not done properly, there will be hollow phenomenon between the tile and the structural layer due to sticking and combination. Tile hollowing is also divided into partial hollowing, emptying corners, empty drums between the cement layer and the wall, and empty drums in the wall itself.

2, the hazard of empty tiles

The hollowing of tiles is an item that must be inspected critically when it comes to the acceptance of tiles. Because if there is an empty drum that exceeds the standard, the wall surface is likely to crack, tilt, fall off, etc., affecting the appearance of the wall and increasing repair costs.

Second, to avoid emptying tiles to pass through the material

There are many reasons for the emptying of tiles, which may be the problem of the master craftsmanship. But there may also be problems with the tiles themselves and with the cement mortar used. Therefore, to avoid empty tiles, first we must select the appropriate tile products and cement mortar.

1, to avoid excessive water absorption of tiles

When buying tiles, it is important to check the water absorption of the tiles. Drop water droplets on the back of the tile to see how fast the water spreads after it has spread. In general, the slower the absorption, the greater the density of the tile. The faster the water absorption, the more sparse the density of the tile, high water absorption. When choosing a tile, you need to select a product with a water absorption within the standard range. If the water absorption rate is too high, after use, it will easily absorb water and expand, resulting in the emergence of empty drums.

Hollow drum performance: Hollow drums due to excessive water absorption of the tiles are generally detached from the edge of the arch, and are often accompanied by small, round cracking defects on the tile surface. The responsibility for the emptying of such tiles is mainly in the manufacturer, not in the construction unit.

2, avoid the tiles on the back of the line is too shallow

In order to fit the tile closely to the wall, the back is generally designed with lines. When the lines are relatively deep, it can be ensured that the tile and the cement mortar layer will not fall off when they are partially detached. Therefore, the best choice for the backing of the ceramic tile is not too light and too simple.

Editor's summary: The precautions for avoiding emptying and detachment and tiling construction are introduced here. For more information, you can follow this site information.

Tile tile paving villa design cement home

 PP wrap tape / PP proven tape Polypropylene anticorrosion Fiber tape ,reinforced tape to protect metallic and concrete surfaces against corrosive forces. It is by modified bitumen with synthetic rubber of increased thickness, laminated onto a film of woven Polypropylene fabric , which creates a strong bond with a pipe surface, protecting against moisture penetration and metal structures.This  tape is the best solution for coating of pipes and repair.

Pipe Polypropylene Anticorrosion Tape

Pipe Polypropylene Anti Corrosion Tape,Pp Woven Tape,Gas Pipeline Tape,Pipe Wrapping Tape

Jining Qiangke Pipe Anticorrosion Materials CO.,Ltd , https://www.pipe-wrap-tape.com