Experts: 3 tricks to make kitchen and bathroom ware more water-saving

At present, there is a faucet on the market. This faucet adopts the steering method to change the direction of the water flow, so that the water flows upward, and the multi-layer filter inside can reduce the impurities of the water; The hole can disperse the pressure of the water column which is ejected upward, thereby achieving the effect of reducing the unit flow rate of water.

If you don't want to spend money to change one, it's okay to make a small "reconstruction" of the tap. Find one or do a mesh-like nozzle to install on the faucet. The small water outlet on the nozzle will make the water flow look bigger, so you can prompt you to control the flow of water to achieve water saving.

The water volume of the compressed water tank controls the toilet water

At present, most of the toilets used by Beijing residents are 6-liter or double-shift (3 liters and 6 liters), but sometimes even 3 or 6 liters of water are still considered wasteful.

Fortunately, it is easier to make some "reconstruction" of the toilet, such as putting bricks in the water tank or a bottle filled with water. These small methods can reduce the amount of water in the water tank.

If you are renovating your home or buying a new home, you can choose a more water-saving toilet. For example, a pressure-assist type water-saving toilet is said to be able to flush all the dirt with only 3 liters of water. The secret is to use an air-assisted water-saving tank that uses the thrust of compressed air when flushing, and 3 liters of water can flush out the dirt.

Replacing the water-saving shower to save water while also improving the shower enjoyment

For household shower nozzles, if the function is relatively simple, it is recommended to change a nozzle that can adjust the size of the water flow and the shape of the water column, so that the water flow can be controlled at any time during the bath to achieve the purpose of water saving.

Or, you can change a water-saving shower directly. A bubbler is placed inside the shower to create pressure on the water flow and make the water dense, thus reducing the amount of water. If you want to be more advanced, replace with an aerobic shower that can be mixed with air. This shower uses only half of the normal water pressure to produce enough water for the bath, and it also produces a massage effect.

V-Profile Press fitting pipeline system is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc.

Compared with traditional pipeline system, it`s not only more economical, safer and healthier, but also easier and faster for installation with longer service life.

 

1.  Press fitting range:

Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;

Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;

Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;

Others-- Pipe cap, Pipe Bridge and Flange connector.

2.  Material:  Stainless steel 304L, Edelstahl 1.4306/ Edelstahl 1.4301, AISI304L, Inox304L;

Stainless steel 316L, Edelstahl1.4404, AISI316L, Inox316L;                                            

Galvanized carbon steel, 1.0034C-Stahl, Kohlenstoffstahl,  ACCIAIO AL CARBONIO.

  

3.  Size: 3/8``-4``inch or as request,  pipe wall thickness: 1.0--2.0mm

Sizes range:

DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.

JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.

4.  Standard:

Press fitting standard:  (DIN) DVGW W534-1995;   (JIS) JWWA G116:2001; GB/T 19228.1-2003

Pipe standard: DIN10312:2003; GB/T 19228.2-2003

O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003

5.  O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.

 EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃,  Suit medium: cold and hot water, compressed Air etc.

 

6.  Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.

7.  Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.

 

Installation and Connection Order

 

 

Equipments And Quality Control

 

                                                             Orderly Workshop                     

                                                        Efficient Anneal Equipment

 

 

                                                             Pressure Testing                           

                                                                   Tensile Testing

 

Stainless Steel V-Profile Press Fittings(JIS)

Stainless Steel V-Profile Press Fittings,Equal Tee Press Pipe Fitting,V Profile Steel Elbow Press Fitting,V Profile Female Tee Press Fitting

WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , https://www.kasinvalvefitting.com