Don't let Yuba become a "bomb"

Into the winter, bathing at home, Yuba is an essential electrical appliance for warmth and warmth. However, bad news has recently arrived one after another: a new mother in Hangzhou recently gave a baby a bath, the Yuba suddenly exploded; Wuhan also had a Yuba explosion fire. In this issue of the safety warning column, the Provincial Safety Supervision Bureau (Sichuan Coal Supervision Bureau) reminds you to use the Yuba correctly and improve safety awareness.

Yuba should be installed in the bathroom center

Many families install Yuba in the bathtub or shower position, so the surface looks hot and quickly, but it does not know that it has buried a safety hazard. Because the infrared radiation lamp heats up quickly, it is too close to burn the human skin. The correct method should be to install the Yuba in the center of the top of the bathroom, preferably at a distance of 40 cm from the head, which is both safe and functional.

Keep the bathroom clean and dry

Do not spray with water when working in Yuba. Although Yuba's bulbs are waterproof, the metal fittings in the body are still electrically conductive. If it is sticky, it may cause a short circuit in the power supply. After the bath is finished, do not turn off the Yuba immediately. Wait until the moisture in the bathroom is removed before closing. Always keep the bathroom ventilated, clean and dry to extend the service life of the Yuba.

Usually, you can not switch the Yuba frequently. When the Yuba is running, avoid large vibrations around it, otherwise it will affect the service life of the heating bulb. If you need to replace the infrared heating bulb, you must use the special bulb specified by the manufacturer, otherwise it will not only affect the effect, but also may cause danger. Huaxi Dushi Bao reporter Xi Qinling intern Zhu Shuangyan Luo Tianyi

Natural Pps Rod

Natural Pps Rod,Unfilled Pps Rod,Natural Pps Plastic Bar,Virgin Natural Pps Bar

Ningbo Zero Engineering Plastics Co.,Ltd , https://www.zero-peek.com