What is the preservative wood shelf

I don't know whether or not you have found out that many communities are equipped with flower racks. In fact, we must know that the function of flower racks is not small. It can be used as a shady rest, and it can also play a role in embellishing garden landscapes. Following small to tell you about how to do wood preservative flower and what is the wood preservative.

How to make wood preservation

1, the general flower shelf is four columns, two columns cross file, the other in the top of the cross file this still depends on the requirements set by the B, for example, a bag of cement, a total of four bags of sand bags, outdoor weathering Wooden oil, moving ladder. So good tools: fixed cutting machine, mobile cutting machine, jig saw, angle grinder, electric drill, iron drill, hammer, horizontal pipe, level ruler, shovel, file.

2. Polish all the wood once, or touch after the wood is finished. Then you still have to dig the column hole within the range specified by the specification. Usually, the hole is dug just deep enough. Of course, there are some wood preservatives that are to be standardized according to their specifications, and the width of the hole The length and width of the pillars will be determined. For example, if 20*20 wood is used as a pillar, the hole will need 40*40. The space left for this will make room for the jar of cement.

3. Remember to cut a hole in the top of the column, two two holes in one direction, because the two columns are connected with a crosspiece and a crosspiece with two columns. Draw the space for each seat of the crosspiece that you plan on the column cross file, and then process the crosspiece. First, draw a mouth on the crosspiece, that is the width of the column crosspiece, and draw on the upper crosspiece. , so that you can use the mobile cutter to open the mouth, then you use a guillotine knife to smooth the mouth.

4. Generally speaking, to make a flower stand is just for the sake of beauty. Then it will open a bend in the head of the cross file. At this time, it needs a curve play to operate. In fact, this principle is also relatively simple, you will understand it. Put the column posts first for the two columns, and then add the upper side of the stack to the top side, first place the two mouths off the column, so that the trend into a word can be stabilized, of course, it is best to give four The pillars were all fixed with planks, and everything was stable. After all, it was wood, and it was uncomfortable to tie to the body.

5. Finally, after the anticorrosive wood flower stands are recommended, do not forget to perfuse concrete around the anticorrosive wood flower racks, fix the anticorrosive wood flower stand, and then apply a layer of paint to the surface. This also serves to protect the surface. So that the anti-corrosion wood flower rack can be used very well.

What is wood preservative

Anti-corrosion wood, in fact, this wood material is the artificial wood after the artificial wood added chemical preservatives, so that it can make this wood it has anti-corrosion, moisture, anti-fungal, anti-insect ants, anti-mildew and other characteristics. At the same time, this material can also directly contact the soil and moisture environment. It is often used in outdoor flooring, engineering, landscapes, wood preservatives, etc. For people to rest and appreciate the natural beauty, it can be said that it is outdoor flooring, garden landscape, wood swing, entertainment Facilities, wood planks and other ideal materials are also loved by garden designers.

Summary: Regarding how the anti-corrosion wood flower racks are related to what is preservative wood, the anti-corrosion wood flower rack must follow its steps. This will not only make it look good, but it will also be more practical, and the final specification still has to refer to each other. The rules dictate design.

This is a complete 4CH CAR DVR system,the whole kit include:

1pcs 4CH CAR DVR standard version,without GPS/4G function.No SD card 1pcs 4.3inch stand type car monitor 2pcs mini analog car camera without rear parking lines.No audio 2pcs mini analog IR car camera without ruler,no audio 1pcs separate microphone for audio pick up. 4pcs 5 meters video cable.

Taxi Monitoring System Another name including:

Network Monitor,Prtg Network Monitor,Microsoft Network Monitor,Taxi Tire Pressure Monitoring System

Taxi Monitoring System

Taxi camera,Taxi in-car security camera system,Taxi cctv system,Taxi cctv camera system

SHENZHEN SANAN TECHNOLOGY CO.,LTD , https://www.sanan-cctv.com