Discription:
Comply with the requirement and rules of SOLAS and amendment 1996, LSA Code, MSC.218(82),MSC.272(85),MSC.320(89)&MSC.81(70),MSC.226(82),MSC274(85),MS321(89). It can be driven by outboard engine and inboard engine, Boat body material: fire-retardant type FRP. It is self-righting by itself when capsized. Rubber fender is fitted around the boat the deck can self-motion drainage.Â
Â
Main Features:
1. Comply with the requirmrns and rules of SOLAS and amendment 1996, LSA Code, MSC.218(82), MSC.272(85), MSC.320(89)& MSC.81(70) , MSC.226(82), MSC274(85), MSC321(89);
2. Boat body material: fire- pretended type FRP;
3. Fit the self-righting device. It can self-righting by itself when capsized;
4. Fit the off-load release mechanism with the safety pin;
5. Equipment is equipped according to SOLAS requirment;
6. The surface for walking is the antiskid;
7. Equip a manual pump remove the ponding in the boat;
8. Rubber fender is fitted around the boat;
9. The deck can self-motion drainage;
10. Running time of rescue boat when full-loaded & full-speed is more than 4 hours.
Specifications
Main parameters for the resue boat/Single hook rescue boat
Size | Â 4.50*1.86*0.85m |
Passenger | Â 6 persons |
Boat weight(no load) | Â 690 kg |
Persons weight | Â Â 495kg |
Total weight(full load) | Â 1185kg(incl.6P) |
Speed | Â Â More than 6Â knots (with 6P) |
Fuel oil tank capacity | Â Â Â About 50 Liter |
 |  |
Davit for  the 6 man  rescue boatÂ
23KN Single-Arm rescue boat /Â Lifeboat Launching Appliance
Max. Working load | 23KN |
Lifting Load | Â 14KN |
Hoisting Speed |   ≥18m/min |
Lowering Speed | Â 40~60m/min |
Certiifcate | CCS , BV , ,ABS |
SILCA MACHINE KEY CUTTERS
Product Features
1. Material: Ultra-high hardness and high wear-resistant carbide material from Sweden, the ultra-fine particles ,good wear resistance;
2. Manufacturing process: Fully automated grinding center mirror polishing, sharp edge, low cutting noise;
3. Features: accurate size, cutting edge size accuracy of 0.005mm, high precision of cutting key size; sharp cutter edge;
4. Advantages: Sharp, can cut brass keys and nickel silver keys, smooth edges, no burrs;
5. The tracer point is made of carbide, it has good conductivity, which is not bent, ensuring accurate detection, and will not damage the accuracy of the fixture and the spindle;
Suit for Machine: electronic key cutting machines, such as Viper,QUATTROCODE,TRIAX QUATTRO,TRIAX-e.code,KABA ILCO TRICODE HS
Suit for processing keys: All inner milling slots and outer milling slot keys, suitable for processing nickel silver keys, which can efficiently process original and high-hardness key blanks, such as Honda original keys, STRATTEC key blanks, etc.
Silca Machine,Flat Slotter Delta,Delta Flat Slotter,Mircle Key Cutters
ZHANGJIAGANG KEYCUT CO.,LTD , https://www.keycutblade.com