Outdoor Waterproof Siren with Flash for Alarm System

 Outdoor waterproof Siren with Flash for alarm system 

Hot Siren alarm!!! wireless strobe light with siren with waterproof function!!

Product Description
 Specifications
 
strobe light with siren 
1.waterproof function 
2.tamper alarm 
3.jp2 jumper 
4. strobe light 
 
Brief introduction:
 
1. Fashionable and waterproof design
    With double-deck waterproof coil design, it can work in normal state in any weather outdoor.
2. Alarm with flash light and sound
    Integrate both high-bright flash light and high-decibel sound. When alarm occurs, bright light and sharp alarm will effectively shock and deter the criminals.
3. Built-in backup rechargeable battery: keep working even the external power is off.
4. Optional to turn on or off the "beep" alerting of the siren when users arm or disarm the alarm system.
 
Wired Terminal Connection:
Connect Siren with strobe light with siren:
     ---Power on the siren and then keep pressing the PAIR button at the back of the siren for about 3 seconds until LED8 lights on and the siren makes a "di" sound.
     ---Set the control panel in siren setting status. Press any button on the remote controls. It will make the transmitter send wireless signal. The siren    will make a "di" sound after receiving this signal. This means setting completed. If there're two "di" sound, it means the siren has been set before. (You can also check the control panel manual for details.)
 
Technical Parameters:
Voltage: DC12V
Working current: 280mA
Static current: 14mA
Receiving frequency: 315/ 433MHz ±0.5MHz
Wireless receiving sensitivity: 5mV/m
Receiving distance: no obstacle 100m
Anti-interference: 1V/m (Range: 20MHz~1KMHz)
Volume: 110dB±3dB
Working temperature: 0~40°C
 
Relative humidity: 90% (no fog)



   Outdoor waterproof Siren with Flash for alarm system 

Hot Siren alarm!!! wireless strobe light with siren with waterproof function!!

Product Description
 Specifications
 
strobe light with siren 
1.waterproof function 
2.tamper alarm 
3.jp2 jumper 
4. strobe light 
 
Brief introduction:
 
1. Fashionable and waterproof design
    With double-deck waterproof coil design, it can work in normal state in any weather outdoor.
2. Alarm with flash light and sound
    Integrate both high-bright flash light and high-decibel sound. When alarm occurs, bright light and sharp alarm will effectively shock and deter the criminals.
3. Built-in backup rechargeable battery: keep working even the external power is off.
4. Optional to turn on or off the "beep" alerting of the siren when users arm or disarm the alarm system.
 
Wired Terminal Connection:
Connect Siren with strobe light with siren:
     ---Power on the siren and then keep pressing the PAIR button at the back of the siren for about 3 seconds until LED8 lights on and the siren makes a "di" sound.
     ---Set the control panel in siren setting status. Press any button on the remote controls. It will make the transmitter send wireless signal. The siren    will make a "di" sound after receiving this signal. This means setting completed. If there're two "di" sound, it means the siren has been set before. (You can also check the control panel manual for details.)
 
Technical Parameters:
Voltage: DC12V
Working current: 280mA
Static current: 14mA
Receiving frequency: 315/ 433MHz ±0.5MHz
Wireless receiving sensitivity: 5mV/m
Receiving distance: no obstacle 100m
Anti-interference: 1V/m (Range: 20MHz~1KMHz)
Volume: 110dB±3dB
Working temperature: 0~40°C
 
Relative humidity: 90% (no fog)



 

Caterpillar Parts

Caterpillar Parts,Caterpillar Engine Parts,Cheap Caterpillar Parts,Caterpillar Forklift Parts

JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsugenuineparts.com