SBD1105-YQL120| Maintenance-free energy-saving explosion-proof lamp

SBD1103|SBD1105-YQL120|SBD1103|SBD1105-YQL120| Maintenance-free energy-saving explosion-proof lamp company website: http://

SBD1103|SBD1105-YQL120|SBD1103|SBD1105-YQL120| Maintenance-free energy-saving explosion-proof lamp I. Product overview
SBD1103/SBD1105-YQL120 maintenance-free energy-saving explosion-proof lamp, suitable for indoor lighting in various workshops, workshops, cabins and other places. It is suitable for floodlighting in platforms, corridors, passages and outdoor places. Can be used in China's coal industry, CNPC, Sinopec, CNOOC, electric power, metallurgy, steel, shipbuilding, aerospace, public security fire, chemical, government departments, large enterprises fixed lighting needs. Applicable to IIA, IIB contains explosive gas environment 1 zone and 2 to indoor and outdoor dangerous places lighting.


Second, product features
1 The explosion-proof type of the lamp is a composite type or dust explosion-proof type, which is suitable for lighting in explosive places.
2. The luminaire consists of a light source cavity, an electrical box and a wiring compartment, and is hermetically designed.
3. The aluminum alloy die-cast ballast box contains electric devices such as ballasts and terminal blocks. The light source chamber housing is made of pure aluminum with a specular reflector inside. The outer surface of the lamp is made of polyester.
4. Polycarbonate prismatic transparent cover, snap-fit ​​connection. The side of the ballast box is open.
5. The lamp has the advantages of good corrosion resistance, high luminous efficiency, wide illumination range, soft light and durability.
6. The lamp is equipped with a rubber gasket, which has reliable sealing and good protection performance.
7. The lamp has novel appearance, beautiful appearance, convenient installation and maintenance, and is suitable for low and medium shed lighting.
8. This lamp is suitable for pipe hanging type, ceiling type, suction wall type and pole type installation.
9. Electromagnetic induction lamp light source, high power factor, high luminous efficiency, wide range of use, long-term use and maintenance-free.



Third, the characteristics of electromagnetic induction lamps:
1. Electromagnetic induction lamp has no electrode and wire, has long life, and is maintenance-free for many years. The service life is 100 times that of incandescent lamp and 10 times that of metal halide lamp.
2, high efficiency and energy saving, luminous efficiency 65LM / W, power factor up to 0.89, 80% energy saving than incandescent lamps.
3, good stability, in the range of voltage fluctuations of 180-250V, it is recognized that the normal start and stable work.
4. Green and environmental protection, this electromagnetic induction lamp has no electromagnetic pollution, and no stroboscopic light makes the eyes unfit for fatigue.
5, instantaneous start, start and restart without delay, can be lit instantly.



Fourth, technical parameters
1. Execute GB3836.1, GB3836.2 and GB3836.3 "Electrical Equipment for Explosive Gas Environment" (equivalent to IEC60079 and EN series standards); GB12476.1 "Electrical Equipment for Flammable Dust Environment" (equivalent to IEC61241) And EN series standards).
2. Explosion-proof mark: Ex ed?? CT3. Dust explosion-proof mark: DIP A20 TA.T4
3. Shell protection rating: IP65.
4. Anti-corrosion grade: WF2.
5. Applicable light source: electromagnetic induction lamp 50W, 80W, 120W.
6. Rated working voltage: 220V 50Hz.
7. Inlet: G3/4” or φ44mm.
8. Cable outer diameter: ?9 ~ ? 10.5mm.
8, Dimensions: high 380X diameter 350



V. Precautions During transportation, the lamps should be installed in the carton equipped with foam shock absorption.
When used, the surface of the luminaire has a certain temperature rise, which is normal.
Always turn off the power before replacing the lamp.
If the external flexible cable or cord of this luminaire is damaged, it must be replaced by the manufacturer or its service agent or a qualified person.

Http://

Sixth, quality assurance:
The company has passed the ISO9001:2008 international quality system audit and certification. This product strictly implements the ISO9001 international quality management system standard production, ensuring that the product quality fully meets the national standards and design requirements. The product is guaranteed for 7 years, within 7 years from the date of purchase. Any failures under normal use are the responsibility of the company for free maintenance.




SBD1103|SBD1105-YQL120|SBD1103|

HDPE Pre-applied Waterproofing Membrane

SRD HDPE Pre-applied Waterproofing Membrane has three layers. HDPE is the main waterproof layer, and there is one protective layer (for an environmental change), and one isolated layer. It has a self-adhesive overlap edge on the long side. SRD HDPE waterproof membrane is suitable for most below-ground structure projects.The wet bonding technique: After moisture curing reaction between cement slurry and high polymer, the membrane and the structural layer will be firmly bonded, which will improve the reliability of the waterproof layer.
Great puncture resistance and shock resistance: It can withstand the working load and the attack of the reinforcement cage, and doesn't need special protections.
Great puncture resistance and shock resistance: It can withstand the working load and the attack of the reinforcement cage, and doesn't need special protections.
Outstanding chemical resistance: SRD HDPE Membrane has great resistibility towards the alkali water from the concrete, home scrap will not affect it.
Minimal surface treatment: Doesn't need oil or heat to dry the wet substrate, with no volatile substance.

Hdpe Pre-Laid Anti-Stick Waterproofing Membrane,Self Adhesive Waterproofing Membrane,Waterproofing Membrane Self Adhesive,Self Adhered Waterproofing Membrane

Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com