Introduction of special foam beads for lost foam casting

If you want to ensure the quality of lost foam casting products, the use of high-quality casting special foam beads is a key link. The foam model used to make a product with packaging foam will greatly affect the quality of the casting product because of its uncertainties such as gas generation and carbon addition. Now with the rapid development of the lost foam casting industry in China, the raw and auxiliary materials have also become more and more specialized. In the following, taking the special foam beads of the disappearing die casting of the glory card as an example, some technical indexes and performances of the foam beads in the lost and auxiliary casting raw materials are introduced in detail:

1. Conventional special names for special foam beads for lost foam casting:

1. Expandable polystyrene resin beads (EPS) for lost foam casting;

2. Expandable methyl methacrylate and styrene copolymer resin beads (STMMA for short);

3. Expandable polymethyl methacrylate resin beads {abbreviated as EPMMA).

The user selects the required variety and specifications according to the characteristics and requirements of the casting to ensure a high quality foam model and lost foam casting.

Second, the scope of application of special foam bead products for lost foam casting

Variety
Scope of application
EPS
Non-ferrous metals (aluminum, copper, etc.), gray iron and general steel castings
STMMA
Gray iron, ductile iron, low carbon steel, alloy steel castings
EPMMA
Ductile iron, malleable cast iron, low carbon steel, alloy steel, stainless steel castings, etc.

Third, the product specifications

index
EPS
STMMA
EPMMA
Color
Translucent beads
Translucent milky white beads
Milky white beads
Apparent density (g/ml)
0.55-0.67
0.55-0.67
0.55-0.67
Pre-expansion ratio ≥
50
45
40
Volatile (%) ≥
6.5
8
10

Fourth, the bead size (mm)

1# 0.60-0.80
2# 0.42-0.60
3# 0.30-0.40
4# 0.25-0.30
5# 0.21-0.25
6# 0.18-0.21

Note: This product contains low-boiling hydrocarbon foaming agent. It must be stored in a closed container lined with plastic film bag during storage and transportation, and stored in a place with low temperature, ventilation and away from fire.

Fifth, the method of use:

The production process of the lost foam casting foam model is as follows:

Original beads → pre-foaming → drying, curing → molding foaming → foaming plastic mold

1. Original resin beads selection

First, according to the material of the casting and the quality requirements of the casting, which kind to choose, according to

The minimum wall thickness of the casting is chosen to be the bead size. The primary beads generally used have a particle size less than or equal to 1/9 - 1/10 of the minimum wall thickness of the casting.

2. Pre-expansion of resin beads

The pre-expansion of the beads for lost foam casting uses a batch pre-expansion machine. There are two types of intermittent pre-expanders, namely, a pressurized pre-expander and a vacuum pre-expander. Generally, the vacuum pre-expansion machine is better than the pressurized pre-expansion machine. The pre-fabrication parameters of the two pre-foaming machines can be referred to as follows:

Next page

PH-B-L5

Phlizon 1000w/1500W/2000w /2500W/3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.


Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED Grow Lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.


1000w 2000w 3000w 1500w led Grow Light Features

Indoor grow light

COB series, high power branded CREE COB with high Par value and deeper penetration

VEG/BLOOM and STRONGER switches for each grow stage.

Special spectrum for plant growing to increase the yield.

Building to Harvest: Beneficial for seeding to fruiting stage.

Good quality fans with low noise.

Easy to install by minute

Energy Saving, environmental friendly

3 Years Warranty

We are a professional Chinese manufacturer of PH COB Series, and look forward to your cooperation!

PH-B-L5

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledplantgrowlights.com

Posted on