Customized Two Hole Countersunk Holes NdFeB Magnet

  • Model NO.: 48H
  • Trademark: SINE
  • Origin: Ningbo, China
  • Application: Industrial Magnet, Motor Magnet
  • Specification: Grade and size customized
  • HS Code: 8505119000

Product Description
Strong Permanent Neodymium Motor Magnet

1. Materials: Neodymium-Iron-Boron;

2. Technology: Utilizes new Sintered NdFeB magnet techniques and equipment such as strip casting, HDDR technology;

3. Magnetic properties: High coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature;

4. Grades: N35-N52, 30M-50M, 30H-48H, 30SH-45SH, 30UH-40UH and 30EH-38EH;

5. Shapes: Arc

6. Size: According to customers' request;

7. Coatings: Ni, Zn, gold, copper, epoxy, chemical, parylene and so on;

8. Applications: DC and servo motors, Linear actuators

Motor Neodymium magnet is an alloy magnet made from ND, Fe, B and other trace metal elements. It is a rare earth magnet known so far for the strongest magnetism as well as high performance (8MGOe-55MGOe) and good coercive force. Proven production process, strict quality assurance, complete technical service and remarkable cost performance.

Machining and tolerances

Neodymium is easily ground, although coolants must be used in the process to avoid spontaneous combustion of powder. Grinding should be completed before coating or plating is applied to protect the magnets from corrosion. Standard tolerances for neodymium magnets are +/-0.05mm for ground dimensions.

Temperature constraints

The temperature coefficient of neodymium has triggered several grades to be developed to meet specific operating requirements. Please refer to our chart of magnetic properties to compare the characteristics of each grade. Before choosing a neodymium magnet be sure to consider your application's maximum operating temperature.

Added value services

Our knowledgeable engineering department is always available to assist in determining the best grade and size of neodymium magnet for your application. We also offer coating and plating choices for magnets we custom-machine.

Technical Data of Sintered NdFeB Magnet
Grade Br Hcb Hcj (BH)max  (Tw)
mT (kGs) kA/m (kOe) kA/m (kOe) kJ/m3 (MGOe)
N35 1170-1220 (11.7-12.2) ≥868 ( ≥10.9) ≥955 ( ≥12) 263-287 (33-36) 80 ºC
N38 1220-1250 (12.2-12.5) ≥899 ( ≥11.3) ≥955 ( ≥12) 287-310 (36-39) 80 ºC
N40 1250-1280 (12.5-12.8) ≥907 ( ≥11.4) ≥955 ( ≥12) 302-326 (38-41) 80 ºC
N42 1280-1320 (12.8-13.2) ≥915 ( ≥11.5) ≥955 ( ≥12) 318-342 (40-43) 80 ºC
N45 1320-1380 (13.2-13.8) ≥923 ( ≥11.6) ≥955 ( ≥12) 342-366 (43-46) 80 ºC
N48 1380-1420 (13.8-14.2) ≥923 ( ≥11.6) ≥876 ( ≥12) 366-390 (46-49) 80 ºC
N50 1400-1450 (14.0-14.5) ≥796 ( ≥10.0) ≥876 ( ≥11) 382-406 (48-51) 60 ºC
N52 1430-1480 (14.3-14.8) ≥796 ( ≥10.0) ≥876 ( ≥11) 398-422 (50-53) 60 ºC
30M 1080-1130 (10.8-11.3) ≥796 ( ≥10.0) ≥1114 ( ≥14) 223-247 (28-31) 100 ºC
33M 1130-1170 (11.3-11.7) ≥836 ( ≥10.5) ≥1114 ( ≥14) 247-263 (31-33) 100 ºC
35M 1170-1220 (11.7-12.2) ≥868 ( ≥10.9) ≥1114 ( ≥14) 263-287 (33-36) 100 ºC
38M 1220-1250 (12.2-12.5) ≥899 ( ≥11.3) ≥1114 ( ≥14) 287-310 (36-39) 100 ºC
40M 1250-1280 (12.5-12.8) ≥923 ( ≥11.6) ≥1114 ( ≥14) 302-326 (38-41) 100 ºC
42M 1280-1320 (12.8-13.2) ≥955 ( ≥12.0) ≥1114 ( ≥14) 318-342 (40-43) 100 ºC
45M 1320-1380 (13.2-13.8) ≥995 ( ≥12.5) ≥1114 ( ≥14) 342-366 (43-46) 100 ºC
48M 1360-1430 (13.6-14.3) ≥1027 ( ≥12.9) ≥1114 ( ≥14) 366-390 (46-49) 100 ºC
50M 1400-1450 (14.0-14.5) ≥1033 ( ≥13.0) ≥1114 ( ≥14) 382-406 (48-51) 100 ºC
30H 1080-1130 (10.8-11.3) ≥796 ( ≥10.0) ≥1353 ( ≥17) 223-247 (28-31) 120 ºC
33H 1130-1170 (11.3-11.7) ≥836 ( ≥10.5) ≥1353 ( ≥17) 247-271 (31-34) 120 ºC
35H 1170-1220 (11.7-12.2) ≥868 ( ≥10.9) ≥1353 ( ≥17) 263-287 (33-36) 120 ºC
38H 1220-1250 (12.2-12.5) ≥899 ( ≥11.3) ≥1353 ( ≥17) 287-310 (36-39) 120 ºC
40H 1250-1280 (12.5-12.8) ≥923 ( ≥11.6) ≥1353 ( ≥17) 302-326 (38-41) 120 ºC
42H 1280-1320 (12.8-13.2) ≥955 ( ≥12.0) ≥1353 ( ≥17) 318-342 (40-43) 120 ºC
45H 1300-1360 (13-13.6) ≥963 ( ≥12.1) ≥1353 ( ≥17) 326-358 (43-46) 120 ºC
48H 1370-1430 (13.7-14.3) ≥995 ( ≥12.5) ≥1353 ( ≥17) 366-390 (46-49) 120 ºC
30SH 1080-1130 (10.8-11.3) ≥804 ( ≥10.1) ≥1592 ( ≥20) 223-247 (28-31) 150 ºC
33SH 1130-1170 (11.3-11.7) ≥844 ( ≥10.6) ≥1592 ( ≥20) 247-271 (31-34) 150 ºC
35SH 1170-1220 (11.7-12.2) ≥876 ( ≥11.0) ≥1592 ( ≥20) 263-287 (33-36) 150 ºC
38SH 1220-1250 (12.2-12.5) ≥907 ( ≥11.4) ≥1592 ( ≥20) 287-310 (36-39) 150 ºC
40SH 1240-1280 (12.5-12.8) ≥939 ( ≥11.8) ≥1592 ( ≥20) 302-326 (38-41) 150 ºC
42SH 1280-1320 (12.8-13.2) ≥987 ( ≥12.4) ≥1592 ( ≥20) 318-342 (40-43) 150 ºC
45SH 1320-1380 (13.2-13.8) ≥1003 ( ≥12.6) ≥1592 ( ≥20) 342-366 (43-46) 150 ºC
28UH 1020-1080  (10.2-10.8) ≥764 ( ≥9.6) ≥1990 ( ≥25) 207-231 (26-29) 180 ºC
30UH 1080-1130  (10.8-11.3) ≥812 ( ≥10.2) ≥1990 ( ≥25) 223-247 (28-31) 180 ºC
33UH 1130-1170 (11.3-11.7) ≥852 ( ≥10.7) ≥1990 ( ≥25) 247-271 (31-34) 180 ºC
35UH 1180-1220 (11.8-12.2) ≥860 ( ≥10.8) ≥1990 ( ≥25) 263-287 (33-36) 180 ºC
38UH 1220-1250 (12.2-12.5) ≥876 ( ≥11.0) ≥1990 ( ≥25) 287-310 (36-39) 180 ºC
40UH 1240-1280 (12.5-12.8) ≥899 ( ≥11.3) ≥1990 ( ≥25) 302-326 (38-41) 180 ºC
28EH 1040-1090 (10.4-10.9) ≥780 ( ≥9.8) ≥2388 ( ≥30) 207-231 (26-29) 200 ºC
30EH 1080-1130 (10.8-11.3) ≥812 ( ≥10.2) ≥2388 ( ≥30) 223-247 (28-31) 200 ºC
33EH 1130-1170 (11.3-11.7) ≥836 ( ≥10.5) ≥2388 ( ≥30) 247-271 (31-34) 200 ºC
35EH 1170-1220 (11.7-12.2) ≥876 ( ≥11.0) ≥2388 ( ≥30) 263-287 (33-36) 200 ºC
38EH 1220-1250 (12.2-12.5) ≥899 ( ≥11.3) ≥2388 ( ≥30) 287-310 (36-39) 200 ºC
28AH 1040-1090 (10.4-10.9) ≥787 ( ≥9.9) ≥2624 ( ≥33) 207-231 (26-29) 230 ºC
30AH 1080-1130 (10.8-11.3) ≥819 ( ≥10.3) ≥2624 ( ≥33) 223-247 (28-31) 230 ºC
33AH 1130-1170 (11.3-11.7) ≥843 ( ≥10.6) ≥2624 ( ≥33) 247-271 (31-34) 230 ºC

PF MOLD uses decades of experience in manufacturing unscrewing plastic injection molds. The output is molds that are used for the production of internal threaded plastic injection parts. External threaded plastic injection do no need to be produced using unscrewing injection molds.

Detailed threads on the Plastic Parts cannot be easily removed from the mold using traditional knock-off, so unscrewing plastic molds have gained popularity not only for its quality but also as a means for cost savings. Unscrewing plastic injection molds can be more complex in design than most plastic injection molds

The molds are operated at high speed to realize faster cycle times. To prevent damaging the threads on the plastic part during production, unscrewing plastic injection molds are being used by the industry.

Unscrewing is widely used for plastic parts that require high volume of output during production. It also prevents damaging the threads on the plastic parts during production. We make unscrewing plastic injection molds to produce high quality parts such as:


 Automobile Industry parts

 Bolts and Nuts

 Bottle caps and closures

 Cosmetics containers

 Consumer products packaging

 Lids

 Medical supplie

 Personal care products

Unscrewing Injection Mold

Side Base Plastic,Precision Plastic Mold,Plastic Injection Molding,Perfect Mold

PF Mold Co., Ltd. , http://www.pf-mold.com

Posted on