The first step of the renovation

The decoration of the ceiling is the first job of the renovation project. From the process point of view, most of the peers will start from the construction of the ceiling. But it is also often overlooked by users and most designers and engineering contractors.

>>>Recommendations: Stucco ceiling tips

Smallpox (Board), also known as ceiling or top grid. Exercises are called "smallpox" or "ceiling."

The ceiling decoration materials are the main basis for distinguishing the names of smallpox, mainly including: light steel keel plaster ceilings, gypsum board ceilings, splint ceilings, profiled elongated aluminum buckle ceilings, square plated aluminum buckle ceilings, stained glass ceilings, etc. Wait. For ceilings made of aluminum gussets, we usually call it "aluminum gusset ceilings". Here we take a look at the characteristics of various ceilings.

1, light steel keel plaster board ceiling.

Gypsum board is made of cooked gypsum as the main raw material mixed with additives and fibers, with light weight, heat insulation, sound absorption, non-combustible and sawability and other properties. Gypsum board and light steel keel (pressed by galvanized sheet steel) combined to form a light steel keel gypsum board. Light steel keel gypsum board ceilings have a variety of types, including gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board strips. There are many specifications available on the market. From the current point of view, the use of light steel keel plaster ceilings as a partition wall is used to make smallpox.

2, plasterboard ceilings.

Mostly used in commercial space, the general use of 600x600mm specifications, with the bone and dark bone of the points. Keel often uses aluminum or iron.

3, splint smallpox.

It is commonly used for renovation. The plywood (also called plywood) is made by steaming and softening the logs, cutting large sheets along the annual rings, and drying, arranging, gluing, forming, hot pressing, and sawing. With light material, high strength, good elasticity and toughness, impact resistance and vibration. Easy processing and finishing, insulation and other advantages. Doing ceilings generally use 5 PCT splints. 3% is too thin and easy to arch, 9% too thick. The reason for its popularity is that it can easily create a variety of modeling ceilings, including curved, round, and square. But there is a drawback: afraid of termites. The remedy is to spray termite-resistant potions.

When the splint ceiling paint is used for some time, it may be lost. The method is to paint the varnish (varnish) before the decoration, and then do another process after it is dried. Another drawback of the splint is that the interface will crack. The method is to use the atomic ash to make up the interface during the renovation.

4, profiled strips of aluminum buckle ceiling.

Most of the home decoration has no longer use these materials, mainly not resistant to dirt and easily deformed.

5, square plated aluminum buckle plate ceiling.

Use in kitchens, toilets and other places that are easily contaminated. Is the current mainstream product.

6, stained glass ceiling.

A variety of patterns can be illuminated inside. Only for partial use.

7, metal grid ceilings.

The aisles or halls used in commercial spaces are modern.

The decoration of the ceiling, in addition to material selection, is mainly a question of the proportion of shape and size. The former should be dealt with specifically according to specific conditions, while the latter must be calculated based on ergonomics and aesthetics. From a height point of view, the home interior clearance height should not be less than 2.6 meters. Otherwise, try not to shape the ceiling, and use plaster lined frames.

If the decoration is light steel keel plaster ceiling or splint ceiling, paint on the surface. The joints should be sealed with gypsum powder first, then sealed with kraft tape and then primed and painted.

Entrance decoration restaurant decoration paint glass home decoration space lighting decoration partition painted wall kitchen glass sliding door

French Bleed Collection Laminate Flooring

Laminate Flooring Molding Co., Ltd. , http://www.nslaminateflooring.com