Tapered roller bearing layout and features

Source: Bearing network time: 2013-07-02

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Tapered roller bearing; assembled as a rolling body in the imported bearing; guided by the large rib of the inner ring.
Tapered roller bearings can accept radial load; and axial load in one direction; load can be large. As a bearing with high load capacity; there are series of added roller scale and number of rollers. Same as radial thrust bearing; usually The two bearings are used in opposite directions. In this case; the axial direction can be adjusted according to the interval of the same inner ring or the same outer ring; to obtain the set clearance.
The tapered roller bearing is of separate type; the inner ring and the outer ring can be separated and disassembled. Because the contact angle is not the same; the common cone angle, the middle cone angle and the large cone shape; the number of the rollers can be divided into two columns. And four-row tapered roller bearings. Usually used steel stamping cage.

Recommend to friends comments close window

Bearing related knowledge

NSK bearing and smooth oil cooperation effect selection of bearing program sequence protection protection of bearings
Analysis of the causes of skf bearing oscillation loss and analysis of the characteristics of double-row angular touch ball bearings

This article links to http://
Please indicate China Bearing Network http://

Previous:View the faults and disposal methods of imported bearings at work. The following series: Inventory management of rolling bearings

Precision Grinding And Polishing Machine

Ultra-precision cutting Ultra-precision cutting refers to the cutting method whose surface roughness is less than Ra0.04Î¼m. The key problem in ultra-precision machining is that the thin surface layer of 0.1Î¼m is cut in the final step. This requires both an extremely sharp tool with a radius of the blunt circle of the tool at the nanoscale and a tool with enough durability to keep it sharp. At present, only diamond tools can meet the requirements. In ultra-precision cutting, the cutting speed should be very high and the cutting amount should be small to ensure that the residual area on the workpiece surface is small, so as to obtain minimal surface roughness

Precision Grinding And Polishing Machine,Hi Tech Lap Grinder,Grinding And Buffing Machine,Diamond Grinding And Polishing Machine

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com