The laying of floor tiles believes that novices have troubled many people. Then how do you spread out the floor tiles ? How to operate the floor tiles ? If you want to lay a good floor tile, you definitely need to master certain methods and techniques. Then the following Xiaobian teaches everyone how to lay floor tiles . And how to operate the floor tile steps!
Novice how to spread the floor tiles - tile soak
Novices how to lay the floor tiles are the key steps. Many people know that they must first soak the tiles, but do not know how long it will be most appropriate. It is very simple, first clean the bought tiles and soak them in water for 2 hours. After the tile absorbs enough moisture, the surface moisture is wiped clean and then paved, so that when the laying is more docile, will not affect the firmness due to insufficient moisture adhesive, causing hollowing, falling off and other phenomena.
How to lay a floor tile for novices--Set up auxiliary lines
Before the tiles have been laid, it is necessary to level the auxiliary lines and use the vertical lines to determine the wall size lines of the tiles. After that, the horizontal lines are set so that the horizontal lines can be maintained in the brick paving. And the formation of the surface.
Novice how to lay the floor tile ---- set support board
When laying tiles, a horizontal line should be set with a standard rope so that the tiles can be used as a support to prevent the tiles from displacing or falling before reaching the adhesion strength.
Novice how to lay the floor tile ---- paste in order
The laying sequence of the tiles starts from the edge of the door or window or from the balcony. The order is from top to bottom and from left to right. The more concrete laying method is to level the mortar and then put the mortar on the back of the tile. After that, put the tile on the wall, and then gently tap it with a shovel handle or a rubber hammer, so that the mortar fills the space between the wall and the tile.
Novice how to lay the floor tile ---- clean up, maintenance
After finishing the tile, it is necessary to clean up the surface stains and dust in a timely manner. Xiaobian also teaches you some simple methods of cleaning and maintenance. Some surface stains are very serious and can be wiped with 10% dilute hydrochloric acid solution. If you use dilute hydrochloric acid to clean it, you must finally rinse it with tap water. When the tile glaze is cleaned up, apply it to the surface of the pearl brightener spray tile and wipe it again with a soft cloth to keep the tile surface bright and less susceptible to contamination.
Xiao Bian concludes: The simple operation steps of how the novice shop paved the floor tiles Xiao Bian first summed up these 5 points, and hope to help everyone. If you have more questions about how the novice shop floor tile or more related to the decoration, please pay attention to this site, you can also visit this site under the line of experience directly under the consultation.
KZF Self-sealing Valve
The product is a connection device between SF6 Gas Density Meter or SF6 gas density relay and SF6 gas chamber. After installation, it can effectively seal the SF6 gas chamber and prevent unnecessary SF6 gas leak during gas filling by effective SF6 gas fill and vacuuming.
The product is mainly used for electric equipment including SF6-insulated circuit breakers, cubicle type gas insulated switchgears, ring main units, pole-mounted switches, transformers and mutual inductors.
Valve,The Valve,Gaben Valve,Industrial Valves
wuxi kaifeng pressure gauge co., ltd , https://www.wxkfmanometer.com