External wall scaffolding erection specification external wall scaffolding material requirements

Scaffolding must be used in the construction. It is designed for the safety of our construction. It is the guarantee of our life and health. No matter what kind of building, there will be scaffolding, but there are many people who are not so scaffolding. Understand, the following small series of decoration home network will come to introduce to you, what are the specifications for the external wall scaffolding, what are the requirements for the material of the external wall scaffolding.

First, the external wall scaffolding erection specifications

1. When the fastener-type steel scaffolding is sized according to the following table, the corresponding rods can no longer be designed and calculated. However, the bearing capacity of the wall and the foundation of the pole should be designed and calculated according to the actual load and the construction drawing should be drawn. The design calculations for scaffolding must comply with the relevant regulations of the scaffolding specifications and be approved by the technical person in charge of the enterprise.

2. When the erection height is 25-50m, the overall stability of the scaffold should be strengthened from the structure. For example, the longitudinal scissors support must be set continuously, the transverse scissors support is added, the strength of the wall rod is correspondingly increased, the spacing is reduced, and the scaffolding with a height of more than 40 m is set in the windy area. Considering the upward urging force of the wind vortex, the horizontal connection should be set. At the same time of wall parts, there should also be wall-connecting measures against rising and tumbling to ensure the safety of scaffolding.

3. When the erection height exceeds 50m, it can be reinforced by double poles or segmented unloading. The scaffolding and beam slab structure are hoisted along the full height section of the scaffold, and part of the load of the scaffold is transmitted to the building; or The segmented erection is used to carry the scaffoldings of each section to the cantilever beams and frames that are extended by the building, and is designed and calculated.

Second, the external wall scaffolding material requirements

1. The erection of steel pipe scaffolding of this project shall be made of malleable casting fasteners, which shall comply with the requirements of JGJ22-85 of the “Standard for Steel Pipe Foot Fasteners” of the Ministry of Construction, and shall be provided by the manufacturer with the fastener production license, and shall not have cracks or stomata. Forging defects such as shrinkage and blisters, the specifications of the fasteners should be matched with the steel pipe, the surface and the surface should be dry, and the moving parts should be flexible. The minimum distance at the opening when clamping the steel pipe is not less than 5 mm. When the tightening torque of the steel pipe bolt reaches 70N.m, it shall not be damaged. If the old fasteners are used, the fasteners must be sampled and sent to the test unit with relevant national qualifications, and the fasteners are tested for anti-sliding force. The test results meet the design requirements before they can be used in the construction.

2. Steel pipe foot floor handrail, using outer diameter 48mm, wall thickness 3.20mm, steel strength grade Q235-A, steel pipe surface should be straight and smooth, there should be no cracks, delamination, indentation, scribe and hard bend, new The steel pipe used must have a factory certificate. Before the construction of scaffolding, the steel pipe must be sampled and sent to the relevant national qualification test unit for mechanical tests such as bending and tensile strength of steel pipes. The test results meet the design requirements before they can be used in construction.

There are ways to build scaffolding, so some knowledge is something we must master before building. So what are the specifications and material requirements for tile scaffolding? I think everyone knows through the introduction of the above small series, then if If you want to know more about decoration, please stay tuned to the decoration home.

More related wonderful reading:

Aluminum scaffolding method Advantages of aluminum alloy scaffolding

Fiber Reinforced Flat Cut-Off Disc

B&H TOOLS CO., LTD. , https://www.bandhtools.com