![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
For many people, because the prices are too expensive, they are more inclined to buy second-hand housing, and then renovate themselves. In fact, this is also a good choice. Generally speaking, the house can be regarded as an old house for more than ten years. At the time of refurbishment, it was mainly for the purpose of wall rectification and floor refurbishment. In fact, many things need to be done when refurbishing an old house. It is not simply to brush the wall into a new one. The furniture is replaced with a new one so simple, then the old house is refurbished. What are the steps? Take a look.
Old house renovation these few steps
I. Dismantling of waste parts
First, remove the parts that need to be replaced, such as doors, windows, walls, floors, etc. During the construction, we must ensure safety and avoid the danger of causing life and health to others. In addition, when the hydropower is dismantled, it must be insulated and prevented from leaking. work.
Second, hydropower reform
As we all know, water and electricity are the arteries of the house. Therefore, in order to make the refurbished house more dynamic, it is recommended that all water pipes and wires be replaced. In addition, the use of materials, processes, and acceptance must be ignored. The late rework will be a great problem.
Third, the basic construction
After the completion of the water and electricity, the next step is to carry out basic construction. The main task is to refurbish the wall and the ground. After a series of operations, the whole face can be changed, the vitality becomes more apparent, and the old Wall and ground safety factors will also be greatly reduced.
Old home renovation should pay attention to what issues
First, all materials replaced by environmental protection
In home furnishings, the materials of many old houses do not meet the modern requirements, so if it is encountered in the following circumstances it is best to replace, for example, the original wall surface, the top surface of the base is a sand gray wall, need to re-do cement plaster base, The old circuit should be replaced, and the wire laying should be arranged according to the new design scheme. Generally, it is divided into lighting, low-position socket, high-position socket and weak current.
Second, try not to change the structure of the house
Judging from the type of the previous house, it is usually not very good, so many people will think about changing the structure of the house, adding an entrance, playing a wall, etc. In fact, this approach is very bad, because of the city Most of the multi-storey houses are brick-concrete structures, so the wall is first of all a seismic load bearing member, and the second is the containment partition member. If the space is interrupted in order to expand the space, it will leave serious hidden dangers.
Third, do not change the balcony into a kitchen
In order to broaden the range of homes, many people will close the north-facing balcony and turn it into a cooking area, so that the original kitchen can be used as a storage room or other purpose. Once you start using it, you will find that When you start cooking, the entire home is smoke-flavored, and it will affect neighbors upstairs, so don't change the house pattern easily.
Summary: Well, the above is about the content of the old house renovation steps which are introduced, I hope to provide some help to you, I believe that in the subsequent renovation process of old houses , friends will be more handy, so that the room becomes more comfortable.
Open End Blind Rivets,Open End Rivets,Open End Rivet Nut,Blind Rivets Open
KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com