Installation steps of courtyard lights in the community

Installation steps of community street lamp courtyard lamp:
When installing the garden lamp, open the package, check the integrity of the garden lamp, refer to the product manual, and assemble and wire. The general steps are: open the lamp housing, install the light source and supporting electrical appliances (for electrical wiring, refer to the electrical manual), and connect the lead wire Lead the threading hole to the bottom of the lamp post, and then link the lamp head with the lamp post, pay attention to tighten the fastening screws, and then align the courtyard lamp flange with the screw of the foundation embedded part, and stand vertically. Then use a nut or pad to level the mounting nut. (Dig a pit about 1M deep, smash the galvanized angle iron or steel pipe into it, bury it, and connect the ground wire firmly.)
What are the principles of courtyard lamp position arrangement?
â‘  Plane direction: As long as it meets the requirements of a certain illuminance, try to reduce it as much as possible.
â‘¡ As far as electrical is concerned, if possible, be as smart as possible. The parallel arrangement has redundancy and the reliability is guaranteed.

In addition, the installation methods of courtyard lights and installation methods are directly buried and flanges, etc.

Street Light Procurement Network http: //

Sanitary Butterfly Valve

ZHEJIANG HESHUO TECHNOLOGY CO.,LTD , https://www.hosuocn.com

Posted on