![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1, depending on the overall style
The choice of tiles depends mainly on the owner’s own tastes, tastes, consumption levels, etc., but can not blindly select, can not look on the line, pay attention to the type of tile, style and overall style of the indoor coordination. Larger spaces cannot use ceramic tiles with too small size, dark floors cannot use dark ceramic tiles, and kitchen and bathroom tiles must match the shapes and colors of kitchenware and sanitary ware. Now consumers choose more vitrified tiles, vitrified tiles are now popular.
According to Li Zhaojun, the designer of Shenzhen Impression Design Co., what kind of tiles to choose depends on the overall design. No matter how good the ceramic tiles do not match with the overall effect, it also means zero, indicating that this design is a failure. In general, kitchen and bathroom pre-determined wall tiles, reconfigured floor tiles, wall tiles with light-colored matt bricks, larger area with 300mm×450mm, and smaller area with 250mm×330mm, decorative pattern tiles A room generally uses only 2-3 blocks, more will affect the effect. Kitchen tiles use non-slip tiles. The living room and bedroom generally use 600mm×600mm and 800mm×800mm tiles.
2, choose the regular brand
The color and texture of the matte brick are rich, and the paving effect is warm and elegant. It is resistant to dirt and slippery. Polished bricks have a high degree of finish, and in addition to the infiltration of polished tiles, there are micro-polished tiles. The surface of the micro-polished tiles is more delicate, with a higher degree of finish and stain resistance. The high-quality polished brick tiles have no sawtooth, no porcelain, pure color, clear pattern lines, no spread, and strong three-dimensional effect. When a consumer chooses a tile, he may use a nail or a key to scratch the surface of the tile. The hardness is high without leaving marks. It is also possible to splash the ink and tea on the surface. After 10 minutes, wipe it off. Dirty. To choose the regular brand, regular brand tiles in addition to quality assurance, after-sales service is also perfect, if the tile is color, you can exchange free.
Bode tile sales staff believes that the selection of vitrified tiles should be flat, high brightness, and delicate and comfortable. Similarly, the identification of the impermeability of vitrified tiles can also be used "test ink" method. Now selling the fastest is 800mm × 800 glass tiles, buy 600mm × 600mm less and less people, buy 1000mm × 1000mm more and more people.
When picking tiles, the quality of the percussion sound is good; the general density with small water absorption is larger, and the density with the same specification is larger; the two tiles are overlapped to check the flatness of the tiles; the color difference of the tiles is measured. In addition, pay attention to the sample and the warehouse tile grade, color difference is the same. Also, consumers should buy a few more pieces of the actual budget to avoid color differences between batches, or buy them immediately if they are not enough.
3, check the test report
When consumers select tiles, they can identify the quality of tiles by checking the inspection report, certification certificate provided by the merchant. The test report is issued within six months. The final "judgment conclusion" of the test report must be passed, and the inspection agency issuing the test report must be authoritative. Test reports generally include chapters such as CMA (Measurement Certification), CAL (Certificate of Examination), and CNAL (National Laboratory Accreditation). The number of chapters reflects the qualifications of the inspection units. The CMA is the most basic and must have lower qualifications. The inspection unit does not have a CAL chapter, and the state-level and higher-quality provincial inspection units have the CNAL chapter. When viewing the certificate, the certificate must correspond to the sales product. This year, the 3C certification of the ceramic tile has started, 3C certification is the national unified certification standard, the previous other relevant certification will be unified to the 3C certification, through the 3C certified tiles, reliable Sex is better than average.
The test items of ceramic tile are mainly radioactive, and whether the radioactive material exceeds the standard is the most important issue that consumers pay attention to when choosing tiles. Ceramic tile radioactivity detection is based on the national mandatory standard for radionuclides of construction materials GB6566-2001, which mainly detects the radioactivity of radium, thorium and potassium. At present, there are very few radioactivity tests for regular brand tiles.
Tile Lighting Brand Decoration Room Decoration Company Kitchen Wall Tiles Bathroom Tiles Bathroom Tiles Color Bathroom Wall Tiles Bathroom Size Integral Bathroom Toilet Design Bathroom Tiles Small Bedroom Kitchen Tile Tiles Specifications
Pest Control Insecticide,Electrical Products Co., Ltd. , http://www.nsmosquitos.com