Car Remote Control Jammer 315 433 868MHz, Remote Control  Signal Jammer with 12V Car Charger

Car Remote Control Jammer 315 433 868MHz,Remote Control Signal Jammer With 12V Car Charger

Please contact with us at:
MS Rola
My phone:+86-13580038745
 
RC02D dual frequency monitor instructions
 
Product introduction
This product is a high power dual frequency wireless transmitter. Within a certain range,wireless signals of the same frequency can be shielded and used specifically for certain occasions that use radio devices for cheating; remote control electronics; remote weighbridges and other cheating, examination rooms, hotels, conferences, etc.; making cheating wireless signals invalid. The factory frequency (default) is set to 315MHZ and 433MHZ. Other frequencies can also be customized according to customer requirements.
 
Parameter:
Operating voltage: DC9V (built-in rechargeable lithium battery (800MHA))
Operating current: 240mA (dual frequency)
Working frequency: 315/433 MHZ
Coverage radius: 30-100M
Dimensions: 210*60*25MM (including antenna)
Power adapter: DC9V/1A
Colour: Black
Material: Aluminum Alloy
 
Instructions
1.Open the package and screw the instrument antenna to the antenna socket on the back of the instrument. Tighten to prevent abnormal operation.
2.You need to charge 3-4 hours before you can use it. The factory power of the product is only about 50%. (Low battery will directly affect the use of results)
3.Press the side power switch, the blue indicator light, the monitor emits 315; 433MHz wireless signal. That is, press the side power switch again, the blue indicator will turn off and the monitor will stop working.
4.frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to right)
 
Precautions:
1.Never use a non-dedicated power adapter to plug into the power input
2.There is danger of electricity in the host, please do not open the back cover to avoid electric shock and affect the warranty
3.Turn off the power and unplug the power plug when you are not using it for a long time or when you are away for a long time.
4.Please use in a suitable shielded environment, so as not to affect the use of effects
5.Avoid exposure, rain, water droplets, long-term exposure to high temperature and humidity.
6.The effective range of the instrument is a circular area centered on the main unit. Therefore, when using it, be careful to select the correct position of the instrument to avoid blind corners.
7.This product is a sensitive instrument for remote control products. It will shield the remote control signals such as electric cars, automobiles, remote control doors, access control, etc. Please use it rationally.
  Car Remote Control Jammer 315 433 868MHz,Remote Control Signal Jammer With 12V Car Charger

Please contact with us at:
MS Rola
My phone:+86-13580038745
 
RC02D dual frequency monitor instructions
 
Product introduction
This product is a high power dual frequency wireless transmitter. Within a certain range,wireless signals of the same frequency can be shielded and used specifically for certain occasions that use radio devices for cheating; remote control electronics; remote weighbridges and other cheating, examination rooms, hotels, conferences, etc.; making cheating wireless signals invalid. The factory frequency (default) is set to 315MHZ and 433MHZ. Other frequencies can also be customized according to customer requirements.
 
Parameter:
Operating voltage: DC9V (built-in rechargeable lithium battery (800MHA))
Operating current: 240mA (dual frequency)
Working frequency: 315/433 MHZ
Coverage radius: 30-100M
Dimensions: 210*60*25MM (including antenna)
Power adapter: DC9V/1A
Colour: Black
Material: Aluminum Alloy
 
Instructions
1.Open the package and screw the instrument antenna to the antenna socket on the back of the instrument. Tighten to prevent abnormal operation.
2.You need to charge 3-4 hours before you can use it. The factory power of the product is only about 50%. (Low battery will directly affect the use of results)
3.Press the side power switch, the blue indicator light, the monitor emits 315; 433MHz wireless signal. That is, press the side power switch again, the blue indicator will turn off and the monitor will stop working.
4.frequency default ANT1 is 315MHz, ANT2 is 433MHz. (from left to right)
 
Precautions:
1.Never use a non-dedicated power adapter to plug into the power input
2.There is danger of electricity in the host, please do not open the back cover to avoid electric shock and affect the warranty
3.Turn off the power and unplug the power plug when you are not using it for a long time or when you are away for a long time.
4.Please use in a suitable shielded environment, so as not to affect the use of effects
5.Avoid exposure, rain, water droplets, long-term exposure to high temperature and humidity.
6.The effective range of the instrument is a circular area centered on the main unit. Therefore, when using it, be careful to select the correct position of the instrument to avoid blind corners.
7.This product is a sensitive instrument for remote control products. It will shield the remote control signals such as electric cars, automobiles, remote control doors, access control, etc. Please use it rationally.
 

Drill Point Die

Drill Point Die,Drill Pint Die,Drill Bit For Metal,9/32 Drill Bit

Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com