Phenolic insulation board

Phenolic insulation board introduction product concept



The phenolic insulation board is made of phenolic foam, which is a new type of non-combustible, fireproof and low-smoke insulation material. It is a closed-cell rigid foam made of phenolic resin added with foaming agent, curing agent and other additives. Its most prominent features are non-combustible, low smoke, and high temperature resistance. It overcomes the shortcomings of the original foam plastic insulation material which is flammable, smokey and deformed by heat, and retains the characteristics of light foaming and convenient construction of the original foam plastic insulation material.



product advantages



1) Excellent fire performance

The insulation layer is made of phenolic foam and used in combination with other materials for building insulation. It can basically reach the national fire protection standard A level, and fundamentally eliminate the possibility of external insulation fire. The temperature range is -250°C～+150°C.

2), insulation and energy saving effect is outstanding

The phenolic insulation board has good thermal insulation performance, and its thermal conductivity is about 0.023 W/(m·k), which is far lower than the inorganic and organic external wall insulation products currently used in the market, and can achieve higher energy saving effects.

3), wide range of uses

It can be used not only for traditional exterior insulation systems, but also for composite insulation panels with decorative layers. It can also be used to construct traditional EPS/XPS/PU exterior wall insulation system fire barriers for fire protection in curtain walls. Thermal insulation materials, insulation materials inside fire doors, and fire insulation materials for low temperature or high temperature applications. More suitable for workshops with temperatures above 50 degrees.



Product Features

specification
length	≤4000	Mm
width	≤1200	Mm
thickness	≥20	Mm

Product Features
Serial number	project	Test results	unit
1	Compressive strength	≥250	kPa
2	density	50-80	Kg/m3
3	Water absorption rate V/V	5	%
4	Bending strength	1.0 to 1.5	Mpa
5	Thermal conductivity (25 ° C)	≤0.025	W/(m*k)
6	Smoke density level	0 to 15

Applications




The thermal conductivity of phenolic foam is about 0.023 (about 1/2 of polystyrene, the heat transfer coefficient of polystyrene board is about 0.042), and the fire rating is non-combustible grade A (can withstand 150 °C high temperature), and the price is similar to that of polyurethane. Both polystyrene foam and polyurethane foam are flammable and not resistant to high temperatures and are currently being used by the fire department. Phenolic fireproof insulation board can effectively solve the problem of building fireproof insulation. The phenolic insulation board does not melt, does not soften, has low smoke, does not diffuse flame, is resistant to flame penetration, has excellent fireproof performance, and has good thermal insulation effect. It combines excellent fire performance with good energy-saving effects and is suitable for exterior insulation. Phenolic insulation board application form:

1) Double-sided composite aluminum foil (wall insulation and decoration integration, air conditioning insulation duct)

2) Single-sided color steel single-sided aluminum foil (air conditioning duct)

3) Single-sided galvanized iron sheet single-sided aluminum foil (air conditioning duct)

4) Surface composite of other materials, such as interface agent, mesh mortar, etc. (Building wall insulation with a class of fire protection requirements)

5) Color steel sandwich panel is an excellent material for steel structure workshop, purification engineering workshop, clean room, pharmaceutical workshop, movable room, light steel villa, color steel sandwich panel insulation layer uses phenolic resin with excellent fireproof and thermal insulation properties. The foam is pre-expanded in the factory by two layers of pre-coated steel sheets and high-performance phenolic foam insulation between boards. It combines energy saving, environmental protection, economy and aesthetics. It is an ideal for high-grade and beautiful energy-saving building envelope system. Material selection.

Other materials can be selected by customers (aluminum sheet, kraft paper, etc.). The phenolic foam material has been greatly developed since the 1990s. It was first valued by the British and American military, used in aerospace and defense military fields, and later used in civil aircraft. Ships, stations, oil wells and other places with strict fire protection requirements, and gradually promoted to high-rise buildings, hospitals, sports facilities and other fields.



Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

ABS Ceiling Fan

The Ceiling Fan is beautiful in appearance, equipped with durable fan blades and lighting of different colors and styles, and has functions such as lighting, cooling, and decoration.There are much more Led Ceiling Fan styles in our website,such as DC Ceiling Fan ,Iron ceiling fan,Wooden Blades Ceiling Fan With Bulbs,Retractable Ceiling Fan Light,Simple Ceiling Fan Lamp,and best decoration Plywood Led Ceiling Fan.And there are more items are not showing on the website,please feel free to contact us directly for more information.

Led Ceiling Fan,Ceiling Fan,Ceiling Fan Abs Blade,Ceiling Fan With Remote Control,Decorative Ceiling Fan

JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.windfansummer.com