Rational storage and storage of chemical fertilizers

After the spring sowing, most farmers have a certain amount of surplus fertilizer in their homes. If some unreasonable storage practices are adopted, these fertilizers will not only cause nutrient loss and inconvenience in later application, but also may cause accidents such as explosion, burning and poisoning. Therefore, chemical fertilizer must be “five-proof” during storage and storage.

1, anti-moist agglomeration

Moisture or agglomeration caused by chemical absorption due to moisture absorption is a common problem in storage, and the humidity is more serious. The fertilizer should be placed in a dry, cool warehouse. The stack should be 30-50 cm away from the wall. The temperature of the warehouse should be below 30 °C, and the relative humidity should be 40-70%.

2, prevent nutrient evaporation

For less stable fertilizers, such as ammonium bicarbonate must be packaged tightly, keep dry and prevent direct sunlight. When used, it should be used as needed. After using one bag, remove one bag and use the remaining fertilizer to tighten the bag. For ammonium nitrogen fertilizers such as ammonium chloride, ammonium sulfate, ammonium nitrate and ammonium hydrogencarbonate, care should be taken not to coexist with alkaline fertilizers to reduce nitrogen loss.

3, anti-corrosion damage

Fertilizers are generally corrosive, especially acidic fertilizers such as superphosphate, ammonium chloride, etc., which are highly prone to volatile acids during storage. Do not put agricultural machinery such as sprayers, plows, iron drums, etc. with fertilizers for a long time. Corrosion protection.

4, anti-poisoning occurs

Fertilizers such as ammonium bicarbonate, urea, ammonium nitrate, and superphosphate cannot be stored together with seeds, otherwise the germination rate of the seeds will be affected, and the seeds will lose their ability to germinate in severe cases. In addition, food, pesticides, feed, strains and fertilizers cannot be mixed to avoid poisoning accidents.

5, fire prevention and explosion

Nitrate fertilizers should be specially protected from pyrotechnics during storage. Do not stack them with flammable materials. Once you are on fire, you can not use a variety of chemical fire extinguishing agents, you should first use sand grit and then extinguish with water.

Plastic Backing Pad

Flap Disc Plastic Backing Pad are made of Nylon and special glass fiber mixed together, high quality of the raw material used, this makes our backing pads meet all European safety regulations.
The plastic backing pad are perfect for producers of Abrasive Flap Disc for the professional field. Plastic backing pads are more widely used due to their conformability. Durable plastic backing pad allows easy trimming for custom operations, which allows more use of the flaps, especially for blending and finishing. Plastic Backing Pads will not leave any abrasive wear on the workpiece. The max speed can be around 22000-23000RMP

The related abrasive products we can supply is Flap Disc Adhesive, bonded abrasives, and Buffing And Polishing products, such as Cotton Buffing Wheels and Sanding Sponge , if you have any needs about abrasive tools, please kindly feel free to contact us.

Good features
Premium raw material used Light- weight, Long tool life.Excellent heat dissipation.High tensile strength.fully respectful of all European safety regulations

Plastic Backing Pads are made of Nylon mixed together with special glass fiber. Plastic backing pads are more widely used due to their conformability. Durable plastic backing pad allows easy trimming for custom operations, which allows more use of the flaps, especially for blending and finishing. Plastic Backing Pads will not leave any abrasive wear on the workpiece.

Plastic Backing Pad,Nylon backing pad for flap disc,107 plastic backing pad,Flap Disc Nylon Backing Pad,Blue Color Flap Disc Backing

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com