April 19 Nanjing Steel Market Price Quotes


Name of product specification Materials Steel factory / origin Price (yuan/ton) Than yesterday Compared to last week Than last month
altitude Φ6.5mm Q235 Nangang 3450 0 70 70
altitude Φ6.5mm Q235 Ma Gang 3450 0 70 70
altitude Φ6.5mm Q235 Yonggang 3450 0 70 70
Rebar Φ12mm HRB335 Ma Gang 3330 10 50 20
Rebar Φ25mm HRB335 Ma Gang 3300 10 40 20
Rebar Φ25mm HRB335 Nangang 3300 10 40 20
Rebar Φ25mm HRB335 Yonggang 3300 10 40 20
Rebar Φ25mm HRB335 Shagang 3300 10 40 20
Rebar Φ25mm HRB335 Haixin 3250 10 50 20
Grade III rebar Φ12mm HRB400 Ma Gang 3450 0 20 -10
Grade III rebar Φ25mm HRB400 Ma Gang 3400 0 20 0
Hot rolled coil 2.75*1250*c Q235 Mei Gang 4500 0 50 150
Hot rolled coil 3.75*1250*c Q235 Mei Gang 4400 0 50 370
Hot rolled coil 5.75*1250*c Q235 Mei Gang 4250 0 50 250
Hot rolled coil 3.0*1500*c Q235 Shagang 4500 0 50 200
Hot rolled coil 3.5*1500*c Q235 Shagang 4450 0 50 250
Hot rolled coil 5.5*1500*c Q235 Shagang 4250 0 30 250
Hot rolled coil 7.5*1500*c Q235 Shagang 4250 0 30 250
Hot rolled coil 5.5*1500*c Q235 Tang Gang 4250 0 30 250
Hot rolled coil 5.5*1500*c Q235 Ma Gang 4250 0 30 250
Checkerboard 2.75*1250*C Q215 Mei Gang 4650 0 0 -50
Checkerboard 3.5*1250*C Q215 Mei Gang 4500 0 0 0
Boiler plate 8mm 20G Nangang 5250 0 0 50
Boiler plate 20mm 20G Nangang 4800 0 0 50
Container board 8mm 16MnR Nangang 5300 0 0 50
Container board 20mm 16MnR Nangang 4850 0 0 50
Cold rolled plate 1.0*1250*2500 SPCC Wu Gang 4960 0 0 -20
Cold rolled plate 1.5*1250*2500 SPCC Wu Gang 4960 0 0 -20
Cold rolled plate 2.0*1250*2500 SPCC Wu Gang 4960 0 0 -20
Cold rolled plate 1.0*1250*2500 SPCC Ma Gang 4960 0 0 -20
Cold rolled plate 1.5*1250*2500 SPCC Ma Gang 4960 0 0 -20
Cold rolled plate 2.0*1250*2500 SPCC Ma Gang 4960 0 0 -20
Plate 8mm Q235 Ma Gang 4650 50 50 150
Plate 10mm Q235 Ma Gang 4450 50 50 100
Plate 12mm Q235 Ma Gang 4100 0 0 50
Plate 14-20mm Q235 Ma Gang 4000 0 0 50
Plate 8mm Q235 Nangang 4650 50 50 150
Plate 10mm Q235 Nangang 4450 50 50 100
Plate 12mm Q235 Nangang 4100 0 0 50
Plate 14-20mm Q235 Nangang 4000 0 0 50
Low alloy plate 8mm Q345 Nangang 4850 50 50 100
Low alloy plate 10mm Q345 Nangang 4750 50 50 100
Low alloy plate 12mm Q345 Nangang 4400 0 0 120
Low alloy plate 14-20mm Q345 Nangang 4300 0 0 100
I-beam 12# Q235 Angang 3550 0 0 0
I-beam 25# Q235 Lai Gang 3450 0 0 0
I-beam 36# Q235 Lai Gang 3520 0 0 0
Channel steel 8# Q235 Jinan Steel 3230 0 0 0
Channel steel 25# Q235 Wu Gang 3480 0 0 0
Angle Steel 5# Q235 Ma Gang 3300 0 0 0
Angle Steel 10# Q235 Ma Gang 3350 0 0 0
Welded pipe 1.5 inch Q235 Chinatown 3450 0 0 0
Welded pipe 5 inch Q235 Chinatown 3700 0 0 -100
Seamless tube 108*4.5 20# Hong Gang 4600 0 50 50
Seamless tube 219*8 20# Angang 4950 0 0 0
Galvanized coil 0.7*1250*C SGCC-1 Ma Gang 5450 0 0 -250
ll 1.0*1250*C SGCC-1 Ma Gang 5400 0 0 -250
ll 0.5*1000*C JY200 Wu Gang 6200 0 0 -200
ll 0.75*1250*C JY200 Wu Gang 5550 0 0 -200
ll 1.0*1250*C JY200 Wu Gang 5400 0 0 -250

Editor's Choice




Total 2 Page First Previous [1] [2] Next Page Last Page

Microbend Mass Flow Meter

Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.

Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.

Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com

Posted on