De Ze flooring how to Ze Ze floor official website

De Ze floor , the era is advancing, the industry is developing, the competitive landscape of China's wood flooring industry has undergone earth-shaking changes, the new era ushered in a broader development opportunities for Hengxiang, De Ze floor in order to be more intense and cruel In an industry competitive position, Hengxiang has further planned the development strategy of the brand for the next five years: to create the first brand of “De Ze” floor industry, and to establish a new goal of Deze’s floor as the new leading position in the industry. How is De Ze's floor? I am sure you will help after reading today's introduction.

Deze how to floor

Changzhou Hengxiang Decoration Material Co., Ltd. is located in Henglin Industrial Zone, the eastern suburbs of Changzhou. The company was established in 2002 and covers an area of ​​30,000 square meters. It has 20,000 square meters of modern standard factory buildings and has a fixed assets of 30 million yuan.

Since the establishment of Dezee Flooring Co., Ltd., our company has been focusing on the shaping of corporate image, new product development and technological transformation, based on the construction and operation of the brand, and strengthening the basic management of the company. Highlight quality control.

Dezee flooring company always insists that quality is the life of a company and it is known as "high starting point, high standard, high quality, strict requirements". Has five sets of fully automatic pressing production lines, five enhanced floor slotting lines; with annual production capacity of 10 million square meters of reinforced flooring. The company actively adopts an advanced management model to continuously improve and improve the quality management level of the company. The company has successively obtained the “National Industrial Product Production License”, “ISO9001 International Quality System Certification”, “ISO14001 Environmental Management System Certification” and “China Environmental Labeling”. ", "EU CE certification." The products have been qualified by the national quality supervision department for 6 consecutive years.

  

Dezai floor joining advantage

De Ze floor, build brand with integrity, do the nation's first brand - ethnic elegance, Dezevin.

De Ze Flooring Company has integrated the traditional Chinese Confucian culture and modern western technology with the “De Ze” brand, and has developed six series including Ze Ren, Ze Yi, Ze Li, Ze Zhi, Ze Xin, Ze Zhong, and the products are distributed in 28 provinces across the country. The municipalities, autonomous regions, and the United States, Canada, South Africa, Russia, South Korea, Central Europe, and more than a dozen countries in Southeast Asia are well received and praised by consumers at home and abroad. At present, the company is moving in the direction of specialization, networking and diversification.

De Ze floor, Confucian culture is the precious heritage of the Chinese nation, with a cultural advantage. For China, the birthplace of Confucian culture, it is a new attempt to find a path that truly suits itself in the process of modernization of business management and between advanced science and technology and traditional culture. China's corporate management must not follow the rules of the Western countries for a long time. Instead, it should create a management model with Chinese characteristics and introduce the essence of Confucianism into the concept of corporate management. This is the era of choice for us.

Dezee floor joining conditions:

First, with certain economic strength, the capital strength of provincial cities/municipalities is more than 2 million yuan, and that of prefecture-level cities is 800,000 yuan or more.

Second, have a superior store hardware, provincial-level city stores a single room area of ​​not less than 200 square meters, prefecture-level city stores a single room area of ​​not less than 150 square meters.

Third, with mature market operating experience and terminal sales channels.

Fourth, with a strong brand service philosophy, we must closely follow the company's overall development strategy.

V. Other conditions Please contact the National Operation Center.

  

Dezee floor official website : http://dezediban.jiam.shgao.com/

Editor's summary: The above is a brief introduction to De Ze floor, to learn more about the relevant knowledge, may wish to enter the official website consulting, or to buy Qi Jia Mall favorite products.

Flooring Flooring Selection Flooring Brand

Check Valves

A ball check valve is a check valve in which the closing member, the movable part to block the flow, is a spherical ball. In some ball check Valves, the ball is spring-loaded to help keep it shut. For those designs without a spring, reverse flow is required to move the ball toward the seat and create a seal. The interior surface of the main seats of ball check valves are more or less conically-tapered to guide the ball into the seat and form a positive seal when stopping reverse flow.

Ball check valves are often very small, simple, and cheap. They are commonly used in liquid or gel minipump dispenser spigots, spray devices, some rubber bulbs for pumping air, etc., manual air pumps and some other pumps, and refillable dispensing syringes. Although the balls are most often made of metal, they can be made of other materials, or in some specialized cases out of artificial ruby. High pressure HPLC pumps and similar applications commonly use small inlet and outlet ball check valves with both balls and seats made of artificial ruby, for both hardness and chemical resistance. After prolonged use, such check valves can eventually wear out or the seat can develop a crack, requiring replacement. Therefore, such valves are made to be replaceable, sometimes placed in a small plastic body tightly-fitted inside a metal fitting which can withstand high pressure and which is screwed into the pump head.

There are similar check valves where the disc is not a ball, but some other shape, such as a poppet energized by a spring. Ball check valves should not be confused with Ball Valves, which is a different type of valve in which a ball acts as a controllable rotor to stop or direct flow.

A diaphragm check valve uses a flexing rubber diaphragm positioned to create a normally-closed valve. Pressure on the upstream side must be greater than the pressure on the downstream side by a certain amount, known as the pressure differential, for the check valve to open allowing flow. Once positive pressure stops, the diaphragm automatically flexes back to its original closed position.

A swing check valve or tilting disc check valve is check valve in which the disc, the movable part to block the flow, swings on a hinge or trunnion, either onto the seat to block reverse flow or off the seat to allow forward flow. The seat opening cross-section may be perpendicular to the centerline between the two ports or at an angle. Although swing check valves can come in various sizes, large check valves are often swing check valves. The flapper valve in a flush-toilet mechanism is an example of this type of valve. Tank pressure holding it closed is overcome by manual lift of the flapper. It then remains open until the tank Drains and the flapper falls due to gravity. Another variation of this mechanism is the clapper valve, used in applications such firefighting and fire life safety systems. A hinged gate only remains open in the inflowing direction. The clapper valve often also has a spring that keeps the gate shut when there is no forward pressure. Another example is the backwater valve (for sanitary drainage system) that protects against flooding caused by return flow of sewage waters. Such risk occurs most often in sanitary drainage systems connected to combined sewerage systems and in rainwater drainage systems. It may be caused by intense rainfall, thaw or flood.

A stop-check valve is a check valve with override control to stop flow regardless of flow direction or pressure. In addition to closing in response to backflow or insufficient forward pressure (normal check-valve behavior), it can also be deliberately shut by an external mechanism, thereby preventing any flow regardless of forward pressure.

A lift-check valve is a check valve in which the disc, sometimes called a lift, can be lifted up off its seat by higher pressure of inlet or upstream fluid to allow flow to the outlet or downstream side. A guide keeps motion of the disc on a vertical line, so the valve can later reseat properly. When the pressure is no longer higher, gravity or higher downstream pressure will cause the disc to lower onto its seat, shutting the valve to stop reverse flow.

An in-line check valve is a check valve similar to the lift check valve. However, this valve generally has a spring that will 'lift' when there is pressure on the upstream side of the valve. The pressure needed on the upstream side of the valve to overcome the spring tension is called the 'cracking pressure'. When the pressure going through the valve goes below the cracking pressure, the spring will close the valve to prevent back-flow in the process.

A duckbill valve is a check valve in which flow proceeds through a soft tube that protrudes into the downstream side. Back-pressure collapses this tube, cutting off flow.

A pneumatic non-return valve.

Multiple check valves can be connected in series. For example, a double check valve is often used as a backflow prevention device to keep potentially contaminated water from siphoning back into municipal water supply lines. There are also double ball check valves in which there are two ball/seat combinations sequentially in the same body to ensure positive leak-tight shutoff when blocking reverse flow; and piston check valves, wafer check valves, and ball-and-cone check valves.

Check Valves, Water Check Valves, Brass Check Valves, Sanitary Check Valves

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com