Ceiling gypsum decorative board installation steps and techniques

Here we will analyze the installation steps and tips of the suspended plaster decorative board:

1. The long side of the gypsum board should be parallel to the secondary keel;

2. The plasterboard is fixed on the secondary keel and the cross bracing with self-tapping screws, and the nail distance is between 150-170mm, and the nail is between 10-15mm from the edge of the plate to ensure the stability of the decoration.

3, the installation of double-layer gypsum board, the joint between the two layers staggered, and can not fall on the same keel, should be staggered 300mm;

4. When plastering the plasterboard, fix it from the middle of each block to the periphery of the board, and do not work at the same time;

5, the nail eye should be buried in the surface of the plate 0.5-1mm deep, and coated with anti-rust paint, plaster putty smooth, to ensure its perfect decorative appearance;

6, the board putty putty attached gauze strips, and then scrape the flat putty together.

Although the installation of the plaster decorative panel in the ceiling is relatively simple, if the installation quality of each step is not up to standard, it will seriously affect the stability performance and decorative performance of the ceiling during subsequent use, so Xiaobian suggests that you better find a professional. The installer will install it!

The xunda Heat Shrinkable Sleeve is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.

The Epoxy Primer should applied to the prepared pipe surface then heat shrink sleeve is immediately wrapped around the joint over the wet epoxy primer.

The pipeline heat shrink sleeve consists of three layers, primer layer, adhesive layer, film backing.

Primer: Liquid epoxy,  solvent free two component.

Adhesive: High shear strength copolymer adhesive

Heat Shrinkable Sleeve

Heat Shrink Tubing,Hot Melt Sleeve,Clear Heat Shrink Tubing,Shrinkable Sleeve

Jining xunda pipe coating materials co., ltd. , http://www.pipeanticorrosion.com