1.
5d~15d postpartumSows are weak after childbirth, and their digestion is not strong. It usually takes 5 days after birth to return to normal diet. Therefore, when feeding the postpartum sows, it is necessary to increase the feed supply gradually, and gradually increase the feed supply. Generally, it is fed three times or four times a day, and the amount of feed to the seventh day should be equal to or slightly higher than the feed standard in the late pregnancy. For individual sows with fewer litters, the feeding standard can be reduced below the normal level. If the primiparous sows have poor sputum, but the appetite is normal, the amount of feed can be increased appropriately, and 0.4 kg per day is fed. The general feeding principle is that the amount of feed in this period must be about 0.5 kg more than the late pregnancy. For sows 8d - 13d after delivery, the feed can be formulated according to the lactation diet standard. If the piglets are found to be slow-growing, they can be supplemented with high-protein feeds such as fish meal and bean cake. Feeding must be regular, quantitative, and the feed should be diversified to meet the nutritional requirements of lactating sows. In addition to supplying clean drinking water, we also need to feed some high-quality succulent green fodder.
2, 16d ~ 30d postpartum
Feeding sows must master the principle of “satisfying, eating well, eating outâ€. The sows are fed once a day for 15 days after the birth to avoid the sows eating too much during the day. If the sow has a strong appetite and poor sensation, it can be added a few days in advance. Instead, the feed should be postponed as appropriate. Before the piglets are eaten, try to encourage the sows to have more lactation and let the piglets eat more milk. This allows the piglets to develop normally in the stomach and intestines, creating conditions for eating and eating.
3, 30d ~ 60d postpartum
The sow should stop feeding 30 days after delivery until it is weaned. This period is the last link in the sow production process, which is related to the performance of the sow's annual litter size and the growth and development of the piglets. The sow should be insured one month after the birth.
As can be seen from the above information, the sows in the delivery room are difficult to feed. If they are fed artificially, not only can the sows not be fed in time, but the sows will feel very tired when raising the 10 sows in the delivery room. Modern society, pigs Various automation equipments are available, such as an electronic feeding station for feeding pregnant sows, a boar measurement system for determining various indicators and estrus of breeding pigs, and automated automation of gilts, finishing pigs and nursery pigs. Feeding system and other equipment. So is there a device that can automate the feeding of sows in the delivery room?
At present, there are two companies in the world that produce this kind of equipment. One is Canada's “Gestalt Towerâ€, and the other is “Yi Ai Fort†in Jiuchuan, Zhengzhou, China. The principle of “Yi Ai Fortâ€: the use of the sows in the delivery room is less miserable. The principle is to set the daily food intake and the number of feedings per day for the sow from the upper birth bed to the lower birth bed according to the sow time of each sow.
"Yi Ai Fort" system features:
1, so that sows eat less meals, increase feed intake, reduce feed waste
2, using radio technology, easy to manage
3, save manpower, reduce the dependence of the delivery room on manpower
4, widely used: can be installed in the production bed, limit bar. Therefore, both old and new farms can be installed (high-tech applications are no longer just a proprietary option for new farms).
5, easy to operate: software operation is simple, easy to get started; delivery room feeding terminal and office control software can be smooth interaction, management is more convenient.
6. Simple maintenance: the material is durable, the moving parts are few, and the maintenance is simple. (Each "
Fort" system has been tested continuously for 5 consecutive days before leaving the factory, and the performance is reliable -)"Yi Ai Fort" application: fine, personalized feeding
1. For each sow, formulate the feeding curve for feeding, such as parity, body condition, and number of breastfeeding days.
2, set 4-8 feeding time periods throughout the day to improve sow feed intake
3, the feeding plan combined with the sow's independent feeding, to achieve refined, personalized feeding
4, computer high and low feeding area and actual feed intake curve mark, convenient sow management
"Yi Ai Fort" application effect:
1. Increase the food intake of lactating sows and increase the weaning weight and survival rate of piglets
2, reduce the loss of suckling sows, increase the output of the next litter of piglets
3, shorten the sow estrus interval, improve the annual output of sows
4, improve sow weaning, reduce abnormal elimination rate, improve life-long production
5, each breastfeeding sow life record, provide normal elimination and assessment based on
6, feeding without stress, blocking the adverse effects caused by the frequent entry and exit of the breeder
HIDEEP Thermostatic Shower Mixer s, always the right temperature for utmost convenience and safty.
Thermostatic shower mixers have a build-in thermostat which controle the temperature of the water, this means that the water temperature is unaffected by other factors which may effect water supply to the shower, such as a washing machine or someone flushing a toilet, the HIDEEP thermostatic valve features a built-in temperature stop to prevent accidental scalding.
HIDEEP new built-in system makes installation of the wall-mounted thermostatic mixer easier even before tilling or plsdter eorkd and allows for the adjustment of the valve of the wall recess. A safe system that protests the mixer from debris and gives easy access for the maintenance and replacement of the cartridges and filter.
The latest generation of thermostatic shower mixers are equipped with an additional safety device. Thanks to the new technology, which keeps the mixer's metallic surface separate from the flow of the hot water, the mixer will never reach a scalding temperature externally, even when using high temperature.
1. 38℃ safe and comfortable, guarantees greater safety maintaining the water temperature constant with more accuracy.
2. Very fast reaction time and temperature balance.
3. As highlighted, the thermostatic mixer has only one minimum higher temperature point in comparison with the other mixers.
Enjoy Thermostatic shower mixer, enjoy new lifestyle.
HIDEEP Product line |
||||||
HIDEEP Product Information |
||||||
Product description |
Shower faucet |
|||||
Brand name |
HIDEEP |
|||||
Material |
Brass main body and zinc alloy handle |
|||||
Material analysis |
Cu≥59% |
|||||
Air pressure testing |
0.6 Mpa |
|||||
The thickness of chrome plating |
Nickel>8um Chrome>0.2um |
|||||
Salt spray test |
24 hours |
|||||
Water flow |
Bath/Shower Mixer≥18L/min, |
|||||
Cartridge life time |
300,000 times open and close |
|||||
Quality guarantee |
5 Years quality guarantee |
|||||
Certification |
ISO9001, CE |
|||||
OEM and ODM |
Acceptable |
|||||
Installation mode |
Wall-mounted |
|||||
Function |
Hot/cold water mixer |
In winter, no matter whether adults or children are very torment to wash up and even don't want to touch water at all. However, we still need to wash hands and faces for cleanliness. Therefore, thermostatic faucet has become the great gospel of water use in winter. The thermostatic faucet has a built-in thermostatic cartridge which can automatically adjust the cold and hot water. So that the water temperature can be maintained at the set parameters and water flow can meet the needs of different users.
Thermostatic Shower Faucet
Thermostatic Shower Faucet,Single Handle Thermostatic Shower Faucet,Bathroom Thermostatic Shower Faucet,Thermostatic Shower Mixer Faucet
Kaiping HIDEEP Sanitary Ware Co., Ltd. , http://www.hideepglobal.com