![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
There are many materials for wall decoration, such as latex paint, diatom mud, ceramic tile, wallpaper, etc. Among them, the wallpaper has occupied a place in the wall decoration market due to its advantages of small pollution, numerous patterns, and beautiful patterns. Many young people out of appearance. In consideration of various factors such as price and environmental protection, we have chosen wallpapers. However, we may not know that wallpapers also have the following disadvantages. For example, the gap between wallpaper and wallpaper is difficult to handle, and how can we deal with the wallpaper properly? Gap, seamless wallpaper to achieve it? Now Xiaobian tells you!
How to deal with the gaps in wallpapers and quick processing requires "three steps"
1, overlap cutting method
This method of wallpapering is to combine the advantages of the previous two methods with each other, remove the disadvantages, and then generate new methods. Specifically, the edges of the two wallpapers are overlapped and the colors are matched. Then the bottom wallpaper is cut off with a knife, so that the remaining wallpaper colors can be paired together without overlapping, which is not only beautiful, but also relative to the construction. There is not a lot of material used in the method, so it is best to use this kind of joint treatment. However, this method of attachment is not a small test for the skills of the workers and the fees are relatively high. You can choose to paste according to your actual situation.
2, using the stitching method
It is the two wallpapers that are tightly docked together, leaving no gaps or overlapping. The wallpaper applied by this method has the effect of the upper layer, and the joints are smooth and smooth without traces. But there is one thing that is not good is meeting the kind of owner who has requirements for the suit, the effect of this method is not very good.
3, build a stitching method
The construction principle of this method is to put a wallpaper on top of another wallpaper. This kind of construction process is more convenient, and it can solve the problem of flowers very well. As long as the length of the flowers is spent, it will be longer. However, due to the overlap, such a practice will have a wide and flat stack of marks on the wall, which has an impact on the beauty and is not very attractive. Therefore, it is necessary to paste the front and paste it in the direction of the main light, so as to minimize the influence of the paste on the wall marks.
Therefore, how to deal with the gaps in the wallpaper, experts reminded the workers when the master is paving the wallpaper, the owner must remind the workers to be aware of the details, just when the seams can be attached to reattach, after the wallpaper to be closed The window will naturally dry, which will avoid seams and will make the adhesion stronger.
Standard requirements for wallpaper seam processing
Material requirements: When processing wallpaper seams, special wallpaper glue (wallpaper powder: white glue = 1:1) should be used. In winter dry conditions, the viscosity of the glue can be increased appropriately to slow the drying speed of the glue;
Seam position: The position of the wallpaper seam should be avoided from the inside corner, set at a distance of 30mm from the inside corner. If the design uses a harder wallpaper such as PVC, you can choose the seam at the inside corner;
Wallpaper edge: door line, storage cabinet side, baseboard and other parts, wallpaper should be posted into the installation position of at least 30mm, wire boxes, boxes and other openings around the edge, the wallpaper must be trimmed according to the edge of the reserve box neat Founder;
Offset treatment: Use a clean white towel to scoop soapy water to wipe off the glue mark, then wipe it with a wet towel to remove it. Pay attention to gentle movements and avoid excessive force to fade.
Wallpaper seams can be said to be a key to the success or failure of wallpaper construction, so be sure to pay attention when dealing with these problems. Otherwise, an accidentally unattended wall will leave you with an unpleasant affair! The above is the related content of the three steps of wallpaper gap processing. For more exciting information, please pay attention to this website!
Wallpaper Paving
Release Agent,Silicone Oil,Cas 63148-62-9,High Quanlity Silicone Oil
Quzhou CanWin New Material Co., Ltd. , https://www.canwinnm.com