Buy only right, not expensive, how to choose solid wood furniture

　　 With the continuous improvement of people's living standards, the choice of furniture, whether it is taste or grade, people's choices are gradually improving. Many people may not pick furniture and pursue prices blindly. In fact, this is the wrong concept of consumption. No matter what purpose you buy furniture for, Xiaobian feels that choosing the right one is the most important.


1. Solid wood furniture is usually not made of the same solid wood material. Solid wood furniture is divided into beech wood, teak wood, maple wood, oak, red toon, ash, elm, poplar, pine, etc., each kind of wood All have different characteristics. When buying solid wood furniture, you must first think about whether you can use solid wood furniture or if you want to specify a certain kind of solid wood. Generally speaking, mahogany solid wood furniture is the best quality, and the price is relatively expensive.


2. If the material has been determined, then look at the appearance. The appearance mainly depends on whether there are cracks, mildew spots, scars, degumming, lines, etc. Also pay attention to whether the surface color of the solid wood furniture is even.



3. Observe whether the solid wood furniture is defective. The main stress-bearing parts of the furniture, such as uprights and the load-bearing horizontal bars between the uprights and the ground, should not have large knots , cracks or cracks. The structure is firm, the frame must not be loose, and the tenon and material are not allowed to be broken.


4. Finally, look at the strength of the board surface of the wood. You can feel the fastness of the board surface by pressing with your fingers. One side of the material should be fixed with a cross-shaped fixed frame. If the skeleton is sparse, the surface will feel unreal and the panel will vibrate greatly; the drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition plate is multi-purpose, with a large area The partition should be made of five-layer board.

Category Directory http://




  1. Shantui,Shanghai,Pengpu,Hebei,XuanGong,Inner Mongolia Dadi,Zoomlion series Bulldozer,Daifeng Pipelayer Maintenance Service and spare parts .
  2. Shantui,Degong,XCMG,LiuGong,XGMA,SDLG,Wheel loader,Grader,Road Roller and Spare parts.
  3. CCEC,DCEC,Weichai Steyr,Shangchai,Xichai,Engine Unit and Diesel Generator set and spare parts.
  4. Komatsu,Cat,Hitachi,Volvo,Case,Sany,XCMG,SDLG,Lishide,etc spare parts, Maintenance and Multi-functional parts.

Bulldozer Engine Parts,Bulldozer Hydraulic Parts,Bulldozer Electric Parts,Bulldozer Structural Parts, Bulldozer Bearing ,Bulldozer Undercarriage Parts,Bulldozer Seal Ring.

We have rich experiences Maintenance Technical Engineer team,which means can provide Customs with highly efficiency Maintenance Services.In the past few years ,we have running the Maintenance services very well all over the world,solved the problems in time,because of our outstanding technical services for Bulldozer,Pipelayer,Excavator.
With the Independence Rights of  Imp&Exp,Our business have covered every part throughout the country.Under The Belt and Road Initiative,International business also has developed to Russia, CIS countries,Middle east area,South America,Africa etc

Bulldozer Hydraulic Parts

Bulldozer Hydraulic Parts, Original Dozer Spiral Bevel Gear, Shantui Bulldozer Connector, Bulldozer Hydraulic Pump Parts,Torque Converter For Sd22 Ty220,Sd13 Main Frame And Transmission

Jining Changsong Construction Machinery Co., Ltd. , https://www.jncsmachinery.com

Posted on