Inverter water cooling new technology passed the appraisal

The inverter water cooling technology development and industrial application project has passed the expert appraisal organized by the Science and Technology Department of Gansu Province. The experts at the meeting agreed that the technology has reached the international advanced level.

It is understood that the high-efficiency pure water refined preparation and the three-stage pure water finishing reactor developed by Lanzhou Chemical Research Center have replaced the water-cooling technology of two famous foreign companies after several years of industrial operation. The results show that compared with the two foreign water-cooling technologies, the technology improves the purification efficiency of pure water by 50% and the cooling efficiency by 40%, thereby reducing the number of unplanned shutdowns and economics of urea and high-pressure polyethylene production in Lanzhou Petrochemical Company. loss. This technology can be widely applied to the industrial field using water-cooled frequency converters.

Global hardware network

Concerned about surprises

Tag: Inverter Cooling efficiency Lanzhou Petrochemical Company High pressure polyethylene Water-cooled

Previous: Development and application of low-temperature iron plating technology Next: Analysis: Water-saving faucet purchase skills and use precautions

Safety Gloves

There are many kinds of protective gloves. In addition to chemical resistance, there are also anti-cutting, electrical insulation, waterproof, cold resistance, thermal radiation protection, fire retardant and other functions. It should be noted that the general acid and alkali resistant gloves are not the same as the chemical resistant protective gloves. So when needed, you should choose protective gloves that prevent all kinds of chemicals from penetrating.

The correct use of
1. Check whether the gloves are damaged before each use
2. Wear protective gloves before handling harmful substances or operating dangerous procedures
3. Avoid exposure of pollutants and contact with the skin after removing the contaminated gloves
4. Contaminated gloves should be wrapped before being discarded
5. Reuse protective gloves should be thoroughly cleaned and air-dried after use
6. Choose gloves of the right size
Maintenance method
1. Put protective gloves in a dry, dark and constant temperature environment
2. When there are a large number of chemical substances remaining, use appropriate solvent to clean, but avoid using corrosive cleaning fluid
3. Dry the gloves thoroughly after washing. Do not use heat to dry the gloves unless instructed by the manufacturer, as it will age the gloves quickly
Proper use and maintenance can properly increase the service life of protective gloves.

IMG_0320




safety gloves and goggles,safety gloves electrical work,safety gloves for woodworking,safety gloves rubber

Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com

Posted on