Pump bearing protection

Home>Bearing knowledge>Water pump bearing protection
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Pump bearing protection

Source: China Bearing Network Time: 2014-07-01

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1) Newly used water pump; usually replace the smooth grease (oil) after 100 hours of operation; replace it once every 500 hours in the future.
2) Select smooth bearing with smooth grease; after running for 1500 hours; replace the smooth grease; the amount of oil added may not be too much or too little; too much or too little smooth grease will cause the bearing to heat up; The volume of the bearing chamber is 1/2~2/3.
3) Regarding the selection of smooth oil smooth bearings; the amount of oil should be added to the regular orientation.
4) The container with smooth oil or smooth grease should be clean; it should be sealed normally; there should be no dust, iron filings, etc.; avoid.
5) Motor bearings usually use sodium-based smooth grease; this smooth grease is characterized by high temperature (125 ° C); but it is easy to dissolve in water damage bearing; so it can not be used for the smoothness of water pump bearings.

Recommend to friends comments close window

Bearing related knowledge
Analysis of the damage of the rolling bearing. The current shopping mall bearing classification sliding bearing fault characteristics. The common bearing inner ring fixing method rolling bearing device--heating device method


This article links to http://
Please indicate the bearing network http://

Previous: NSK Bearing Clearance Method Next: How to Receive the Call for Advice

Sensor Night Light

Sensor Night Light,Led Strip For Sensor,Motion Sensor Night Light,Auto Sensor Night Light

NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.intellingentlighting.com

Posted on