Customized wardrobe "tailored" Detailed explanation of the whole process of wardrobe installation

Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

Customized wardrobe installation seems to be a complicated process. Only after you understand the specific installation steps and methods, you will feel that the custom wardrobe installation is not as difficult as imagined. Custom wardrobes need to be tailored to achieve twice the result with half the effort.

First, the preparation stage

1 expected to arrive

More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware (hardware decoration renderings).

2 fixing screws

The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.

3 cutting side panels

Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.

Second, the installation phase

1 put the bottom plate

The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.

2 fixed frame

Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.

3 installation top plate

It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.

4 mounting shelf

Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.

5 fixed door rail

The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.

6 installation of clothes rail

Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.

Hub Assembly For FORD

SHAOXING ZHENGHONG AUTO PARTS CO.LTD , https://www.kontinental-bearing.com