![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Fiber fusion splicers are generally used for the construction and maintenance of optical cables used in optical communications. In order for fiber fusion splicers to best perform their functions, we should use them normally. So what problems should the fiber fusion splicer pay attention to during operation? The fiber fusion splicer is generally used for the construction and maintenance of optical cables in optical communication. In order for the optical splicer to best play its role, we should be normal. usage of. So what problems should the fiber fusion splicer pay attention to during the operation?
First, when cleaning the inside and outside of the fiber fusion splicer and the fiber itself, pay special attention to the V-groove of the fiber fusion splicer and the fiber presser foot and the reflective Lens.
Second, when cutting with a fiber fusion splicer, it is necessary to ensure that the end face of the cut is approximately vertical, so the end face should be in the range of 89 ° ± 1 °. At the same time, when the cut fiber is placed in the specified position, the end face of the fiber cannot be touched anywhere, otherwise it needs to be cleaned again. It is particularly noteworthy that the cutting must be done after cleaning.
Third, when placing the position of the fiber, it is best to be at one-half, not too far or too close.
Fourth, we can't open the windshield when we are in the process of welding.
Fifth, when heating the heat shrinkable sleeve, the part of the fiber fusion must be placed in the middle position, and a certain tension should be added to avoid air bubbles during the heating process, resulting in insufficient fixing. . At the same time, it is worth noting that the heating process and the fiber-optic welding process can be carried out at the same time, but when taking it out after heating, try to avoid touching the heated part to avoid burns.
Sixth, when cleaning the finishing tool, be sure to pay attention to the broken fiber head, because the fiber is not only thin but also very hard. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Yixing Jinke Optical Instrument Co., Ltd. is a high-tech manufacturer committed to research, development and manufacturing of high-quality spectral consumables. With 50 years of experience in research, development and manufacturing, our products include: glass, Quartz Cuvettes, flow cell, lens, reflector, filter, etc.
We have been continuously improving the company's R&D and preparation capabilities, optimizing the management system, and helping customers to continuously improve their product competitiveness. Our strategic partners cover chemical, pharmaceutical, biological, medical in vitro diagnosis, aerospace, communications, food, materials, environment, agriculture, inspection and quarantine and other fields.
As a spectrum accessories manufacturer with strong technical capabilities in China, Jingke Optics will try its best to provide more high-quality and convenient products and services for the majority of scientific researchers and instrument manufacturers, and work with you to create a better future!
Quartz Vapor Cells,Opti Glass Quartz Cuvette,Large Vapor Cell,Quartz Vapor Cell
Yixing Jingke Optical Instruments Co.,Ltd. , https://www.jkgxcn.com