ZSQ submersible mud pump is designed and manufactured by absorbing the advanced technology at home and abroad. The water pump adds a set of stirring impeller at the bottom of the main impeller to spray sediment sludge into turbulent flow, High-density delivery without auxiliary devices. So what is the structure of it? With this question, then we introduce the structural features of ZSQ submersible mud pump. Structure Features of ZSQ Submersible Slurry Pump 1. The whole machine is a dry lower pump type, the motor adopts the oil chamber seal mode, and the internal mechanical seal can effectively prevent the high pressure water and impurities from entering the motor cavity. 2. In addition to the main impeller, there are mixing impeller, sediment can be precipitated in the bottom of the mud stirred into a turbulent flow out. 3. impeller and impeller impeller and other flow components using high-hardness high-chromium steel, wear-resistant, corrosion-resistant, sewage capacity, through the larger solid particles. 4. The motor dive into the water, not from the suction limit, slag absorption rate, dredging more thoroughly. 5. The overall equipment is simplified, not equipped with auxiliary mixing device or injection device, easy to operate, reduce the total unit investment. 6. Impeller impeller directly close to the deposition surface, the depth of concentration control by the dive. In the case of large proportion of media can be through the installation of auxiliary devices to increase the media concentration. Extended reading: China Construction Water Exhibition water pump manufacturers rankings ptc exhibition motor top ten brands pump valve pipe fittings Show Information Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // mj .liuti.cn / (Service Hotline:)
Outdoor Light,Wall Lamp,Garden Light,Led Stair Light
JINGYING , https://www.jingyingoptical.com