How to choose electric heating?

Electric heaters generally use heat-resistant plastics, alloys, and other materials, from the side to see the thickness of the material, the general thickness of the product is better in heat resistance and anti-extrusion; at the same time by observing the interface at the welding is smooth, Whether there are slips on the surface, whether the paint is even, etc. can also be seen that the work of the heater is good or bad, must choose to work good products when buying. Select power heaters are relatively high power, but not the higher the better, the greater the power consumption. A typical 1000-watt product can meet the needs of a room of about 10 square meters. When purchasing, it is necessary to consult the salesman in detail and determine the power according to their own usage.
Power test

When selecting a product, it must be energized for testing, and personally experience whether the temperature rise is rapid, carefully observe whether there is a spark, turn the thermostat to see if there is a significant change in temperature, whether the shell appears soft, deformation, test Buy it later. Look at the after-sales service to select the heater and read it carefully and fill in the product after-sales service card to understand the product warranty and return requirements, so that after the problem can be found as soon as possible after the service department to solve. Use the book: People are enjoying the heating of the heater while safety is also very important. The reporter consulted the manufacturer's technical staff on how to safely use the heater and hoped to provide some references for your use. First, properly configure the outlet. Heater operating power is relatively high, generally more than 1000 watts, the current is larger, so the requirements for the power outlet is also relatively high. It is best to select a socket with rated power and current that conforms to the product specification and has overcurrent protection, and it is best not to use one socket for multiple appliances. Second, pay attention to the location of use. Pay attention to keep away from wet conditions such as bathtub and faucet when using, and the position of the power outlet should also avoid being splashed or sprayed with water, otherwise it will cause a short circuit and burn the heater. Again, don't use the top gear for a long time. When the heater is working, the thermostat should not always be set at the highest block. Long time high temperature work can easily cause burn-in aging of internal devices or destruction of protective components. Finally, it is forbidden to cover the heater.

Three trees painted bathtub socket faucet room electrical paint

FY Bearing Heater

Fy Bearing Heater,Cone Bearing Heater,Fag Bearing Heater,Eddytherm Bearing Heater

Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com

Posted on