![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
With the continuous upgrading of sanitary ware products and continuous upgrades. Induction sanitary ware has entered the public's field of vision and is accepted by more and more consumers. It is convenient and hygienic, safe, energy-saving and water-saving. Its design ideas are concise. How can the sanitary ware be broken?
Induction sanitary ware maintenance
1, sensor taps do not water
First, determine whether the power supply is normal, and the main domestic power supply methods are: AC 220V transformer 12V and 6V; DC 6V (fourth or fifth alkaline battery) and DC 3V (two seventh or fifth alkaline batteries ), hand block in front of the infrared window to observe whether there are lights, part of the sensor faucet brand infrared window using single-chip control, power indicator in the water control part (installed below the basin), if no response, the initial judgment of the induction part Faulty, replaceable infrared probes. It is suggested that users who can't judge the faults, if there are other normal sensor faucets, can use the elimination method. First insert the infrared part of the plug into the faulty faucet water control part. It is easy to judge whether it is a fault in the induction part or a solenoid valve in the water control part, and at the same time pay attention to the possibility of all the plugs being free of contact or moisture.
2, sensor faucet shut off water
Excluding the foreign matter before the sensor window (the principle of the sensor is as long as the object responds within the infrared sensing distance range) and the indicator lamp is normal, check whether the water inlet filter of the water control part is blocked by sediment or other debris. If there is any problem, please clean it; if it fails to solve the problem, please open the solenoid valve and clean the valve core, spring, diaphragm, etc. of the coil and replace it. If you can't turn off the water, it means that the solenoid valve is broken, replace the new solenoid. Valve part can be. There is an experience on this side. If you can't hold the water, you can feel the water. If you find that the amount of water is getting larger, you can't keep the water after you leave the hand, but the water volume is smaller than when you use it. This shows that the solenoid valve is not faulty. Only need to clean the solenoid valve according to the above method and it can be used normally.
3, sensor out of the small amount of water
On the one hand to see if the water pressure and the pipeline itself is small, on the other hand check the water filter part of the inlet side of the filter for impurities, on the one hand, consider the current pipeline are using PPR, part of the construction of the pipe joints using hot melt, It is not ruled out that the hot melt excessively deforms the pipe and the amount of water passing through the pipe becomes smaller.
Main considerations when purchasing sanitary ware
1. Anti-destructive: Faucet fastening problems, stolen accessories, and stolen panels.
2, anti-jamming: basin depth, color, background light, power supply interference will interfere with the product and cause malfunction.
3, waterproof measures (process): the details are not in place, weak signal easily due to wet failure.
4, the durability of the power: the battery needs to be replaced in a very short time, resulting in increased costs and labor.
5, the use of comfort: Most of the products have a large use of blind areas, neither comfortable, it will lead to the user's flapping and cause unnecessary failure.
6, no resistance to chromatic aberration performance: due to different colors of clothing reflectivity and misuse or not working
7. Accessory materials: The use of low-cost stainless steel, 201 stainless steel, or plastic in the bottom case of the panel does not allow the appearance of the product to be rusted. The stainless steel with a national standard above 304 should be used.
8. Solenoid Valves: Do not use plastics. Brass and zinc alloy valve products whose numbers are lower than No. 58 should be used.
9. Faucet body: Do not use plastics, zinc alloys, stainless steels, and brass products with a label lower than 58th, because these materials are not bacteriostatic and easily produce bacteria on the inside of the faucet. Instead, it should use the antibacterial copper product of the national standard No.59.
The advantages of sanitary ware
1. Water saving: The manual faucet switch is often forgotten to turn off, and the infrared-sensing faucet automatically shuts off after use. This will reduce unnecessary waste.
2. Improve hygiene: In public places or places where users are numerous, "touch-free" activities can reduce the spread of bacteria and ensure the cleanliness of the surrounding environment.
3, to prevent damage caused by improper operations: Some people love: "test" durability of the hand handle, common tap after a period of frequent use, easy to damage. Infrared sensor faucets do not need contact, so there is no such problem, reducing the damage caused by the destruction of public property.
4, to adapt to all types of people: infrared sensor faucets and a variety of sensor sanitary ware do not need to turn the hand or finger press, any age or disabled, can be used, so that everyone in the use of a more comfortable feeling.
5, easy to install: due to infrared sensor technology and the use of battery selection improvements, ordinary people can install sensor faucet without the help of professional technicians.
Summary: The above is the content of the induction sanitary ware repair and purchase skills introduced by Xiao Bian. We hope that we can effectively help everyone. For more information, please pay attention to this site.
Sanitary ware Sanitary Ware Sanitary Ware Sanitary Ware Market Sanitary Ware Sanitary Ware Purchase
PVC Super Matt Edge Banding we adopt quality PVC raw material, German UV and ink, JOWAT primer. Thousand designs, 0.35-3.0mm thickness and 12-620mm width. All high-edge raw materials to make sure our PVC Matt Edge Banding is the first class products in this world. Sinowolf Plastic Dekor CO., LTD always focus on producing best quality edge band. Using high-end raw materials, all chemical additives import from Europe, to make sure our plastic edge banding keep stable quality 3-5 years. Our products range include PVC edge band, ABS edge band, 3D PMMA acrylic edge band, Aluminum edge band.
PVC Super Matt Edge Banding, PVC Matt Edge Banding, Matt Finish PVC Edge Banding, Supper Matt Edge Banding, PVC edge Banding Matt, Matt Edge Banding PVC Edging
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com