How much do you know about flexible ceiling materials?

Flexible ceilings are also known as soft film ceilings, which were originally a green, decorative material from Switzerland. In the present renovation, flexible ceilings are often used in hotel renovations, decoration of large conference rooms, decoration of entertainment clubs, and renovation of some government departments. For China's interior decoration industry, flexible ceilings, or flexible ceilings, are still a relatively new concept. Therefore, this type of suspended ceiling has not been widely promoted in China. So, how much do you know about flexible ceiling materials ? If you have this need, you may wish to follow me to understand the relevant knowledge of flexible ceiling materials !

Flexible ceiling material introduction

The so-called flexible ceiling material is generally refers to those soft interior ceiling materials, in layman's terms, soft cloth is used as interior ceiling decoration materials. Soft flexible ceiling material is the most typical soft film ceiling, soft film ceiling decoration material actually originated in foreign countries, was introduced to China in the mid-1990s, its main material is actually a soft PVC material cloth. The soft film ceiling is made of special PVC material, and the finished soft film ceiling is finally finished by cutting and forming and using high frequency welding.

Classification of flexible ceiling materials

Soft film ceilings can be divided into several types depending on the surface quality. Different kinds of soft film ceilings have different decoration effects.

1, the basic film and glass film

The former is one of the most common and lowest-cost soft film ceilings. Its decorative effect is similar to that of paints. The latter is a transparent soft film whose decorative effect is equivalent to that of glass ceilings.

2, light and matte film

Both have a strong light sensation, but the former has a stronger light sensation. As an indoor ceiling, it can be matched with the lighting system and can reflect light like a mirror.

3, whale leather, metal surface, pearl surface dreamy soft film

These types of soft membranes are relatively high-grade soft film ceilings, with decorative effects that emphasize color, high-end, and extravagance.

  

The advantages of flexible ceiling materials

For the Chinese people, the flexible film is relatively unfamiliar with this kind of flexible ceiling material, and even fewer people use it. So, what are the advantages of this kind of decoration material? Here are the advantages of soft film ceilings over traditional ceilings:

1, fire prevention, heat insulation, energy saving

Soft film ceilings have a fire rating of Class B1, which is no less than the average ceiling material, and once the soft film ceiling burns, it will automatically shrink and extinguish; because the soft film ceiling is made of PVC material, it inherits the PVC material. Excellent thermal insulation performance; the superior thermal insulation function and strong light sensitivity of the soft film ceiling can effectively reduce the indoor energy consumption and achieve the effect of energy saving.

2, strong plasticity, beautiful colors, easy installation

Due to the soft texture of the soft film ceiling, the shape of the soft film can be determined according to the shape of the keel. The design of the ceiling can be arbitrarily performed to achieve the desired effect; the surface color of the soft film can be arbitrarily selected, and it can cooperate with the lighting to produce strange colors; The proportion of soft film ceilings is much lighter than that of ordinary ceiling materials. It is very convenient for both installation and handling.

Flexible ceiling material prices

According to different decorative areas, flexible ceilings have a certain amount of price fluctuation. The price of flexible ceiling materials ranges from 150 yuan to 200 yuan.

Note: This price is for reference only! Due to geographical differences, of course, the price will be different. For more details on the prices, please refer to the local distributors!

Flexible ceiling

1. Use the level meter to copy the horizontal line, check the flatness twice, and use the ink line to pop the reference line. If the ceiling room is not horizontal, the ceiling is made as a horizontal or smooth roof, and the designer should consult the designer. The opinion is determined by the customer.

2. The ceiling of the ceiling shall not be lower than 30×50 wood keel or use 6-10 crossover zinc wire, the distance shall be determined according to the field membrane segmentation, and the 100×6 steel shall be expanded and fixed with 1m2 dosage. Steel expansion should be as far as possible in the prefabricated panel seam. Do not use wire as a hanger. The steel expansion nut should be pressed against the wooden keel.

3. The special aluminum alloy keel for membrane structure ceiling is lower than the basic wooden keel (or light steel keel) 17mm, the choice of materials, the use of light steel keel spacing according to the requirements of the material construction. Steel structure to do rust treatment. Wood structure to do fire treatment. The keel needs to be horizontal and vertical; when the soft membrane is made, the keel must have smooth lines, uniform gaps, and vertical parallel; the embedded parts should be firm and firmly welded; the light steel keel should be fixedly mounted and distributed uniformly to assist the keel. To level, the special keel is connected with other top materials, the auxiliary top should be vertical and flat, and meet the actual elevation and drawing requirements.

4. When making the basic keel, attention should be paid to the position of the lamp. There must be no foundation keel at the opening of the downlight. The ceiling and the ceiling lamp should be reinforced separately and use a special barrel lamp stand and a special tuyere bracket. The suspension master lamp should be expanded and fixed with steel. . Light fixtures must be attached to a special base connection. Luminaires or ceiling fans with a weight greater than 3 kg must not be attached to the ceiling keel. Additional hooks should be provided.

5. Translucent film structure. The interior of the hidden lamp should be painted white in order to achieve better results for all lights and do anti-mosquito/dust entry and heat treatment. The installation of lamps must use T4-5 lamp or LED light source. The distance between the light source and the light source is 100mm--150mm. The distance between the light source and the film material is 130mm--250mm. The wiring is arranged and all the lamps and lanterns are guaranteed to be safe and energized. After the soft film is installed, if there is a notification that the light is not on, Adjust and replace in time. Air-conditioning, fire-fighting pipelines, etc. must be pre-arranged and installed. The installation of air outlets, shower heads, and smoke detectors shall be in accordance with the installation requirements for membranes.

6. After all the installation special aluminum alloy keel is fixed, the correct installation method should be used when installing the soft membrane. The edge strip should be installed in place; the heating fan should be heated evenly, and the soft membrane should be flat and clean without any wrinkle, no white spot, and transparent Films must not have patches. Other membrane materials need to be repaired on the back of the membrane when repair is required. It is found that small holes in the soft membrane must be stuck with special glue in time.

7. After the installation is complete, clean the soft membrane ceiling with a clean towel.

  

Flexible ceiling construction process

Three-dimensional special-shaped soft film ceiling construction process:

step one:
1. According to the design requirements of the drawings, a 4X4Cm support keel (which can be a square or square steel pipe) is fixed around the horizontal height position where the soft film ceiling is to be installed.

Note: In some areas where large areas are required, they must be installed in blocks to achieve good results. This requires a wood strip in the middle. This is based on the actual situation and then actual processing.

2. When all the wood strips need to be fixed, then install the aluminum keel of the soft film ceiling on the bottom of the supporting keel.

Step two:

1. After all the aluminum keel with soft film ceiling is fixed, install the soft film. First, the soft film is opened and heated with a special heating air gun. Then, the soft film is tensioned and inserted into the aluminum alloy keel with a special insert knife. Finally, the soft film around the film is trimmed completely.

2. The installation is completed.

Soft film ceiling construction process rules:

1. First, look at the site to see if there are conditions to install the keel: that is, to see whether the wall is completed, whether the part of the woodworking process is qualified, the plastering part needs to be completed first. Special attention should be paid to the woodworking part in accordance with the requirements we have put forward. The size of openings such as lamps and tuyere should be processed in advance.

(2) The on-site conditions Licensor shall enter the construction site. First of all, according to the requirements of the drawings, the woodworker shall fix the keel of the aluminum alloy keel. Note that the angular position must be smooth and smooth at the right angle, and the connection must be flat and dense.

3. Observe that the lighthouse, tuyere, and light pipe plate must be level with the surrounding keel, and it is required to be firm and stable without swinging.

4. Smoke, ceiling lamp, first position and then do a wooden chassis, the bottom of the wooden chassis to be polished smooth, and pay attention to the level, too low it is easy to highlight the traces of the chassis.

5. Before installing smallpox, carefully check whether the keel joints are firm and smooth. Stick the white tape on the sprinkler head. The air outlet should be handled well. When installing smallpox, firstly fix it from the middle to both sides, and pay attention to the dimensions of both sides. Note that the welding seam must be straight and do the angular position first. Pay attention to smoothness. After all the work is done, trim the excess ceilings. To achieve a perfect edge effect.

6. Open the lamp hole: Make a mark on the position of the lamp hole, carefully stick the PVC lamp ring to the bottom of the soft film, and remove the extra smallpox after it is firm.

7. Open air port, light pipe tray: Find the position of the light port of the light pipe. As with the surrounding area, install the soft film on the aluminum alloy keel. Note that the corner should be flat. After doing a good job, you can remove more of the smallpox.

8. Finally, clean the soft film ceiling surface with a clean towel. Membrane ceiling clean.

Editor's summary: Flexible ceilings are a kind of soft membrane, which can be freely changed shape. This is very creative. Flexible ceilings have many good functions, such as more energy-saving, anti-bacterial, and most importantly, flexible ceilings. There are many beautiful designs for us to choose. There is also a need to add more safety and environmental protection to smallpox, which is another option for our smallpox. We can compare the flexible ceiling and the traditional ceiling, and then decide which kind of ceiling to buy.

Ceiling Spotlight Chinese Style Living Room Ceiling Large Living Room Ceiling Decoration Design Ceiling Plasterboard Decoration Materials Knowledge

Sanitary Clamps
Sanitary Clamps Fittings is an important connection part of sanitary fittings. They are usually of material stainless steel 304. With a gasket, a clamp can match two ferrules tightly together without any leakage. KAYSEN sanitary clamps supply mainly four kinds of clamps: 13MHH/DIN heavy duty single pin clamp, 13MHHM-DP/13SF double pins clamp, 13MHP high pressure bolted clamps with brass nuts, and 3-pc clamps(13MHHM-3P) which can meet customer`s different requests.

Sanitary Clamp – Stainless Steel Hygienic Fittings

Size: 1/2″ thru 12″
Material: SS304, SS316L, EN 1.4301, EN 1.4404 etc.
Standard: 3A, DIN, SMS, BS, ISO, RTJ, IDF, INCH,etc.
Sealing Gasket: Silicone, EPDM, PTFE, Buna-N etc.
Temp.: -30°C / -22°F up to +120°C/ +248°F
Application: Pharmacy, Beer, Food, Petroleum, Dairy, Beverage, Biotech ,Cosmetics etc.

Sanitary Clamps

Sanitary Clamps,3A Sanitary Clamps,Din Sanitary Clamps,13Mhh Heavy Duty Clamps

Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com