![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The benefits of a window film start with controlling the heat of the sun. The window film can block 60% -78% of the heat while effectively filtering the light. After the indoor window is filmed, the temperature in the room can be reduced by an average of 3-5 degrees Celsius. Glare is disturbing. It will make your eyes feel tired frequently and reduce work efficiency. The special effect of glass film will create a good environment for you and reduce eye fatigue. Then how to paste window insulation film paste? Take a look at the following introduction.
How to paste window insulation film
1, cut the film (according to the glass size of the glass film cut, should be slightly larger than the glass 1 cm);
2, wash the glass to be thoroughly washed. Spray more water, scrape with a film scraping several times, so that the glass is free of dust and dust without sand;
3. Spray water on the glass and spray a layer of water on the glass.
4, in the film is also sprayed on the water to separate the protective film and the film, in the film on the plastic surface spray water;
5. Scrape the water between the film and the glass. Use a film scraper to slowly scrape the water out of the film and remove excess film corners.
Window film tips
1. When the film is cut, the film should be slightly larger than the glass by 25px or more.
2. The film is divided into two layers, one is a colorless transparent protective film, and the other is a colored film.
3. The protective film is affixed to the 4 points in the direction of clean water, so that there is no air bubbles.
The role of the window film
1. Sun protection heat insulation.
2. Beautiful building appearance.
3. Isolate UV rays to prevent fading and aging of indoor furniture.
4. Increase privacy and protect personal privacy.
Window film precautions
1. Whether the edge of the wiper blade is even and smooth, and whether there is a gap, be sure to carefully check the tool.
2. Check the size and number of foils.
3. When measuring the window size, it must start from the same side of the window. When trimming, align the edge of the film with the centerline for cutting.
4. After all windows are filmed, spray a small amount of detergent to remove other residues. Wipe it with a dry rag to make the window smooth and bright.
Window films are commonly found indoors and used more often in life. Most of the installation of the window film can be resolved in the decoration, if there is no need to worry about the installation later, you can complete it in accordance with the steps of the window film. Used in the study, bathroom and partitions, no need to worry about privacy protection.
The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned.
Ordinary window to change the window large floating window broken bridge aluminum window window cabinet bedroom curved bay window
Baoji Zhipu Non-ferrous Metals Processing Co,.Ltd is experted in sapphire industry. Good reputation and excellent quality make us a big sperm in this field. And we confirm we will do better in producing sapphire products in the future. Our products have four series branch: tungsten, molybdenum and tantalum parts in all kinds of high temperature furnace; Tungsten Wire rope and other series products for pulling method of all kinds of semiconductor crystal growth; tungsten, molybdenum, tantalum and niobium refractory metals` plates, bars, wires, tubes; various diaphragms and electrodes.
Niobium Target,Niobium Bar,Niobium Plate,Industrial Niobium Bar
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com