![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The cold winter came. What kind of heating did the old house hold, and the pipes could not be seen on the wall?
By the end of 2015, there has been a large cooling in the country, and it is also the worst snowfall in Guangzhou. Heating has become a problem that must be considered in both the north and the south. With the improvement of people’s income and improvement of living standards, heating homes have not been installed, and installation of heating equipment is now being considered. In particular, in areas south of the Yellow River, where more than 80% of houses were previously installed without heating, How do you install heating in your home?
After the house has been renovated, it is necessary to consider the following factors: First, the heating effect should be achieved; second, the damage to the original decoration should be minimized; and (iii) As far as possible, the heating pipeline should not be seen on the wall. To meet the above three conditions, the first floor heating can not be installed, because the floor heating is laid in the underground before the renovation, ordinary wall-mounted radiators can be installed, but the heating executives to be placed on the wall, It doesn’t matter if you don’t pay attention to the family, but for the beautifully decorated homes that haven’t moved in for several years after renovation, the impact is very great. So many heating pipes are arranged on the walls of each room, which affects the decoration. The effect, which is why many families prefer to use air-conditioning for heating, is also unwilling to install radiators. (with map).
So there is no plumbing heating equipment, heating effect is particularly good, and has been renovated to install the house can not see the pipe? Have! This is a patented product invented by the German Silver House HVAC International: Inwarm Kick warmer - baseboard stealth heater.
Inwarm kicker warm appearance and solid wood skirting the same, even more luxurious, at the same time with heating function, the material uses fast cooling aluminum alloy, heating effect is better than ordinary radiator and floor heating, and very energy-saving, energy-saving than ordinary radiator 20-30%, 60-70% energy saving than floor heating, installation is very convenient, as long as the original home tiles or solid wood skirtings replaced by kick warm. And its greatest advantage is that from the heat source to the heating supervisor in each room can walk from behind the kicker's feet, and the unsightly heating pipes can't be seen on the wall. At the same time kicking the feet warm and a variety of colors, can be harmonious with the floor. It can be said that Inwarm kick warmer is the perfect heating method for the old room. (insert picture 1)
When the kicker is warm, the aluminum pipe can be used as the heating pipe, and the double pipes can be used in parallel. (The house with small area can also use the double pipe way), and the heating supervisor can follow the kicker and warm the back. The layout of the inside of the room's exterior wall also avoids the trouble of passing through the pipe, and each room can be equipped with a specially-designed temperature control valve of the HWH. The temperature control valve is hidden behind the kicker's warmth and can only be seen outside. The adjustment cap not only achieves room control, but also is beautiful. (insert picture 2)
Inwarm's kicker warms up very quickly, usually within 10 minutes or so, the room can reach the desired temperature, so it can be intermittently heated. When people are not at home, they can be turned off and back home, so energy savings are self-evident.
Since the inwarm kicker's foot has a high heat dissipation (power) per meter, when the gas boiler is heated to 60 degrees during heating, the indoor temperature can reach more than 20 degrees, and it is not necessary to increase the heating temperature like an ordinary radiator. To more than 70 degrees or even 80 degrees. In some places, there are air-heated water heaters as heat sources that can fully meet the heating needs. The heating water temperature is reduced by 20 degrees, and energy saving effects can be imagined by everyone.
Since the connection points of the heating pipes are all hidden behind the decorative cover with the same appearance and kick-foot warmth, the connectors can be seen by removing the decorative cover, and the maintenance is also very convenient. (insert pictures 3 and 4)
The wall thickness of the heating water channel kicked in the foot is as high as 3.6mm, which is 3 times that of ordinary radiators. As long as the water quality meets the national standards, it can be used for a lifetime without worrying about the service life.
Everyone knows that the floor heating is heated from below, and the feet are warm and cold, and the comfort is high. The Inwarm kick warmer has the same effect. Because the kicker is warmly installed at the junction between the wall and the floor of the room, when it is heated, it radiates heat from the periphery to the middle, and the human foot quickly feels warm. It is not only the same as the floor heating. Comfortable, and warmer than floor heating, will not raise dust to the ground, and will not accelerate the rapid volatilization of harmful materials such as formaldehyde on the floor or in the solid wood laminate floor as the floor heating will harm the human body.
Inwarm kick warmer, the latest patented product, does not occupy the wall, does not affect the placement of furniture, does not destroy the overall style of decoration, does not smoke the wall, does not raise dust, does not raise the ground, you can install solid wood flooring with woodland dragons, The fastest heating, the most energy-efficient, not only the installation of new homes is the best heating method, the old room can not see the heating pipe installed, is the most perfect heating method.
Inwarm kicking feet warm - to create a family of eternal warmth!
Tel, QQ, Wechat: tijaonuan
Keywords: surface mounted heating | surface mounted heating | old room mounted heating | kicking warm | wall mounted invisible pipes | surface mounted plumbing
By the end of 2015, there has been a large cooling in the country, and it is also the worst snowfall in Guangzhou. Heating has become a problem that must be considered in both the north and the south. With the improvement of people’s income and improvement of living standards, heating homes have not been installed, and installation of heating equipment is now being considered. In particular, in areas south of the Yellow River, where more than 80% of houses were previously installed without heating, How do you install heating in your home?
After the house has been renovated, it is necessary to consider the following factors: First, the heating effect should be achieved; second, the damage to the original decoration should be minimized; and (iii) As far as possible, the heating pipeline should not be seen on the wall. To meet the above three conditions, the first floor heating can not be installed, because the floor heating is laid in the underground before the renovation, ordinary wall-mounted radiators can be installed, but the heating executives to be placed on the wall, It doesn’t matter if you don’t pay attention to the family, but for the beautifully decorated homes that haven’t moved in for several years after renovation, the impact is very great. So many heating pipes are arranged on the walls of each room, which affects the decoration. The effect, which is why many families prefer to use air-conditioning for heating, is also unwilling to install radiators. (with map).
So there is no plumbing heating equipment, heating effect is particularly good, and has been renovated to install the house can not see the pipe? Have! This is a patented product invented by the German Silver House HVAC International: Inwarm Kick warmer - baseboard stealth heater.
Inwarm kicker warm appearance and solid wood skirting the same, even more luxurious, at the same time with heating function, the material uses fast cooling aluminum alloy, heating effect is better than ordinary radiator and floor heating, and very energy-saving, energy-saving than ordinary radiator 20-30%, 60-70% energy saving than floor heating, installation is very convenient, as long as the original home tiles or solid wood skirtings replaced by kick warm. And its greatest advantage is that from the heat source to the heating supervisor in each room can walk from behind the kicker's feet, and the unsightly heating pipes can't be seen on the wall. At the same time kicking the feet warm and a variety of colors, can be harmonious with the floor. It can be said that Inwarm kick warmer is the perfect heating method for the old room. (insert picture 1)
When the kicker is warm, the aluminum pipe can be used as the heating pipe, and the double pipes can be used in parallel. (The house with small area can also use the double pipe way), and the heating supervisor can follow the kicker and warm the back. The layout of the inside of the room's exterior wall also avoids the trouble of passing through the pipe, and each room can be equipped with a specially-designed temperature control valve of the HWH. The temperature control valve is hidden behind the kicker's warmth and can only be seen outside. The adjustment cap not only achieves room control, but also is beautiful. (insert picture 2)
Inwarm's kicker warms up very quickly, usually within 10 minutes or so, the room can reach the desired temperature, so it can be intermittently heated. When people are not at home, they can be turned off and back home, so energy savings are self-evident.
Since the inwarm kicker's foot has a high heat dissipation (power) per meter, when the gas boiler is heated to 60 degrees during heating, the indoor temperature can reach more than 20 degrees, and it is not necessary to increase the heating temperature like an ordinary radiator. To more than 70 degrees or even 80 degrees. In some places, there are air-heated water heaters as heat sources that can fully meet the heating needs. The heating water temperature is reduced by 20 degrees, and energy saving effects can be imagined by everyone.
Since the connection points of the heating pipes are all hidden behind the decorative cover with the same appearance and kick-foot warmth, the connectors can be seen by removing the decorative cover, and the maintenance is also very convenient. (insert pictures 3 and 4)
The wall thickness of the heating water channel kicked in the foot is as high as 3.6mm, which is 3 times that of ordinary radiators. As long as the water quality meets the national standards, it can be used for a lifetime without worrying about the service life.
Everyone knows that the floor heating is heated from below, and the feet are warm and cold, and the comfort is high. The Inwarm kick warmer has the same effect. Because the kicker is warmly installed at the junction between the wall and the floor of the room, when it is heated, it radiates heat from the periphery to the middle, and the human foot quickly feels warm. It is not only the same as the floor heating. Comfortable, and warmer than floor heating, will not raise dust to the ground, and will not accelerate the rapid volatilization of harmful materials such as formaldehyde on the floor or in the solid wood laminate floor as the floor heating will harm the human body.
Inwarm kick warmer, the latest patented product, does not occupy the wall, does not affect the placement of furniture, does not destroy the overall style of decoration, does not smoke the wall, does not raise dust, does not raise the ground, you can install solid wood flooring with woodland dragons, The fastest heating, the most energy-efficient, not only the installation of new homes is the best heating method, the old room can not see the heating pipe installed, is the most perfect heating method.
Inwarm kicking feet warm - to create a family of eternal warmth!
Tel, QQ, Wechat: tijaonuan
Keywords: surface mounted heating | surface mounted heating | old room mounted heating | kicking warm | wall mounted invisible pipes | surface mounted plumbing
Clox-Tabs are effective for odour control, micro-biological control and pollutant oxidation. Clox-Tabs allow precise control for the concentration, strength and rate of release of chlorine dioxide. Clox-Tabs remain inactive in their dry form and produce chlorine dioxide only when exposed to humid conditions or dissolved in water. A stable composition for releasing chlorine dioxide comprising: at least one metal chlorite; at least one metal bromide selected from the group consisting of sodium bromide, potassium bromide, or lithium bromide; and at least one solid acid source, wherein the composition is free of oxidizing agents other than the metal chlorite.
Chlorine Dioxide Tablet, Fish Water Disinfection, Chlorine Dioxide Products
Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com