Classification and scale of electrical insulation bearings

Home>Bearing knowledge>Classification and scale of electrical insulation bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Classification and scale of electrical insulation bearings

Source: China Bearing Network Time: 2014-09-17

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
★ Product characteristics ZWZ produces electrically insulated bearings with special spraying process; sprays high-quality coating on the outer surface of the bearing; strong bonding between the film and the substrate; good insulation performance; avoids the electric corrosion effect of the induced current on the bearing; avoids current Damage to grease and roll body, raceway; improved bearing life. Suitable for motors, generators; especially variable frequency motors are more widely used.
● Product classification ZWZ produces the following three types of electrical insulation bearings, electrical insulation, deep groove ball bearings, electrical insulation angle, ball bearings, electrically insulated cylindrical roller bearings ■ Scale-scale electrical insulation deep groove ball bearings, inner diameter scale: 40mm ~ 140mm
Outer diameter scale: 80mm ~ 300mm
Width scale: 18mm ~ 62mm
Electrical insulation angle touch ball bearing inner diameter scale: 40mm ~ 140mm
Outer diameter scale: 80mm ~ 300mm
Width scale: 18mm ~ 62mm
Insulated cylindrical roller bearing inner diameter scale: 45mm ~ 140mm
Outer diameter scale: 100mm ~ 300mm
Width scale: 25mm~62mm
â—† Public service ZWZ electric insulation bearings use GB307.1 standard public service; for special needs can be supplied to the corresponding public service level.
â–² ZWZ electrically insulated deep groove ball bearings and cylindrical roller bearings use the general radial clearance of GB4604; if other clearances are required; the electric insulation bearings with corresponding clearances can also be supplied according to requirements.
★ The cage is based on different bearing series and dimensions; ZWZ electrically insulated bearings are equipped with the following cages:
Reinforced nylon 66 cage stamping steel cage cage solid copper cage retainer code mark can refer to specifications deep groove ball bearings, cylindrical roller bearings and angular touch ball bearings.

Recommend to friends comments close window

Bearing related knowledge
Slewing bearing seal
The meaning of the FAG spherical roller bearing rear code name The sealing bearing of the rolling bearing joint bearing: three types of bearing analysis and the bearing torque, load and life (1)


This article links to http://
Please indicate the bearing network http://

Previous: The primary problem of sliding bearings Next: Joint bearing overview

Indoor Farming Plant Lamp

This Indoor Farming Plant Lamp with 220-223lm/w high brightness chip~up to 2.8-3.0umol/J high photon efficiency. 98% lighting transmittance with tempered glass lens, average PPFD 15% increased. Uniform Coverage: All place get the similar PPFD. Average coverage for better yield. LED Grow Light 1000W is more than 50% higher in PPFD compared with HID and HPS. Energy saving with 37% lower power consumption than HID and HPS lamps. The Foldable LED Grow Light Bar is slim design and the foldable up to 180°,making it small, compact and easy to install. Compatible with MixLux LED Grow Light Controller, 0-10V dimming, spectrum can be adjustable.


Indoor Farming Plant Lamp,1000W Led Grow Light,Led Grow Light Sulight,Grow Light Bar,Cob Grow Light

Shenzhen MixLux Technology Co., Ltd , https://www.mixluxled.com

Posted on