Solutions to common problems in feed mill granules

Computers are very common in life, so when the wrong operation occurs, our computer will make a sound and tell us that our operation is wrong. The mechanical granule machine is not like this. The internal sound appears. It is not to remind you which operation has a problem, but to tell you that the granule machine is going to be broken. Let us look at the problem of the granule machine to solve it today. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

1, the problem often occurs in the feed pellet machine is the bearing damage, this phenomenon is often caused by excessive operation, and the speed of running too fast will also cause this problem, so we recommend that it must be reasonable when using Use, the precursor of the feed pellet machine before the failure is the sound, we have to be more slippery bearing immediately, and if the bearing damage is very obvious, we will obviously feel that the feed pellet machine itself has a big There are many parts that are shaking or have stopped rotating. These are all indications that the bearing is defective. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

2, some parts of the feed pellet machine have problems, or loose, these will cause the machine itself to make a sound, some parts appear loose, he will not affect our normal work, and there are many screws will appear The sound, but it will not affect our normal work, so there are many problems that we have neglected to cause future damage, so if we find that the parts are loose, we must even deal with them. There are many parts that have problems that will not only affect us. The work will even affect our personal safety, so we must pay attention to it. If we find that the outlet has the screw falling out, we have to find the part that has fallen off the screw and then screw it on again. This is working for us. A serious test. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

3, there is a particle machine inside, may be caused by their own operation, it may be that when we put in the law to let the particles into the body cavity, this phenomenon is more common, the processing method is also very simple, It is to stop the power-off cleaning, this should also be careful, because the click will generate a lot of static electricity under normal motion, and these static electricity are attached to the mechanical body, we must handle static electricity during operation, open the outer casing of the machine itself, then Clearly, this method is the simplest and most common. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

So we need to know how to find the latest problems in feed machinery and find problems early to solve them. Don't wait until the feed machinery is broken, and then think about solving the problem. At that time, it will only be the money. XWn China Feed Industry Information Network - based on feed, serving animal husbandry

Tool Bucket Bag

Tool bucket bag is a type of bag or carrier designed specifically for holding and transporting tools. It usually has a bucket-shaped design, with an open top and a wide base that allows for easy access to the tools inside.

Tool bucket bags are commonly made of durable materials such as canvas, nylon, or leather, and may have reinforced bottoms or sides to provide extra protection for the tools. They typically have multiple pockets and compartments, both inside and outside, for organizing and storing different types of tools.

Tool bucket bags are popular among professionals in various fields, such as construction, woodworking, plumbing, and electrical work, as well as DIY enthusiasts who need a convenient and portable way to carry their tools to job sites or around their homes.

Tool Bucket Bag,Bucket Tool Organizer,Tool Bucket Pouch,Garden Bucket Tool Bag

ZHANGJIAGANG CITY XIANGLE TOOL CO., LTD. , https://www.sjxiangletoolbag.com