Aluminum sand surface treatment commonly used methods

[China Aluminum Network] In order to make aluminum plate very good for life, we often need to carry out sand surface treatment of aluminum plates. There are several ways to dispose of the sand surface. Let's take a look.

1. Sand blasting method: Use mineral sand or river sand.

2. Scrubbing method: round copper wire brush rolling, the following conveyor belt on the aluminum side to walk forward and left side to side can get sand surface.

3. Scrub method: the same milled aluminum plates are used for the plate mills that are screened out by offset printing. Only by continuously adding water, you can obtain detailed gloss surface effects.

4. Chemical sand surface disposal: There is a monopoly chemical sand surface treatment agent, through chemical treatment, get the role of sand surface aluminum plate, the demand for aluminum crystal thin and uniform.

The treatment of aluminum sand surface seems to be simple, but to be able to do a good job is not bad, so that it can be handled quickly and well, then it needs to improve their own skills.

Diamond Blade

Brazing sintered diamond Saw Blade features

1, the diamond edge can be 2/3 of the diamond height, so grinding

Cutting efficiency is high, and is conducive to scouring debris, surface abrasive particles are not easy to cause

Blockage and loss of grinding ability.

2, due to the high edge of diamond, chip tolerance space, diamond and base

The high binding strength between the bodies prevents the diamond from falling off.

3, brazing diamond saw blade is suitable for cutting ceramics, microcrystalline stone, people

Stone, marble, super sharp.

What are the advantages of brazing diamond saw blade

1, high cutting edge rate, cutting efficiency is very high;

2, diamond and matrix chemical combination, in the work is not easy to take off

Fall;

3. High sharpness, straight cutting edge, fast feeding speed and easy feeling;

4, large chip space, surface abrasive is not easy to lose grinding due to blockage

Ability.

If cracks appear on the grinding wheel in the process of use, stop using the grinding wheel immediately and replace the cutting piece with a new one to avoid breaking the cutting piece and injuring others.

Diamond Blade,Stone Circular Saw Blade,Angle Grinder Stone Blade,Electroplated Diamond Cutting Wheel

Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com